Jump to content

Jesus Hernandez

Supporting Member
  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by Jesus Hernandez

  1. If this is what you've been up to lately, don't hold back! Keep them coming.
  2. You to make it clear. The saya file is actually a rasp shaped like the distal 6 inches of a katana blade on a long and skinny handle.
  3. Emiliano's points are excellent. When this has happened to me it wasn't because of something accidentally getting in rather because the wood has embedded in it tiny stones from when it grew as a tree. The saya file has been my best investment but trying to fit the saya to avoid contact on the sides to begin with is best.
  4. "Simply" beautiful and elegant. The lighting of the photos is excellent to turn the work alive.
  5. I just saw this, Jim. The new format of the forum has me confused in trying to see posts. This is shaping to be beautiful in the end. Looking forward to seeing more.
  6. Listen to Sam. He succinctly pointed out what you need to do.
  7. I have decided to post the entire making of the Blue Ridge Seax on YouTube. It is free for everyone to watch it. Here is the link: The Blue Ridge Seax
  8. I just noticed this thread now. Beautiful images. You have a great eye for light/form/color.
  9. Are there any historical iron mines in the area where you collected the ore? If so old records may show analysis results.
  10. You may want to find out more about the quality of your ore first. The final output of the furnace depends on how much iron goes in.
  11. I think the pH in my stomach just went down a notch.
  12. Nice approach to the serpent. Looking forward to images of the final pattern.
  13. It is not unusual that the hamon looks better on the first go at etching and later attempts at re-polishing using only higher grits and re-etching will not show nearly as much contrast. Having said that, it is possible to bring back the hamon good looks by multiple cycles of re-etching and polishing with paste-based abrasives. And I mean multiple.
  14. I like the shape of the last three blades you posted. To see the hamon at the early stages of grinding I find that being very consistent in leaving parallel grinding marks will allow you to see the hamon at 220 grit or earlier using a strong light source directly above the blade without a need for etching.
  15. Good start. I will suggest to look at original habaki to realize the thickness of the walls.
  16. "Know your steel." That should be a mantra when trying to figure out hamon. To have a large batch of consistent steel (that will allow for multiple tests) and figure out its quirks in your own setup (which has its own set of quirks too) is the way to go. Good for you, Austin.
  17. I'll be there as usual. Looking forward to seeing all of you.
  • Create New...