Jump to content

Karl B. Andersen

Members
  • Content Count

    835
  • Joined

  • Last visited

  • Days Won

    4

Posts posted by Karl B. Andersen


  1. For quite some time I have been selling 70 pound boxes of 1 inch square 5160. This was all made in 1984 and has spent a great deal of its life outdoors, so it is mostly a bit rusty. After a little forging that is all gone anyway.
    At one time I had 2400 feet of this.
    After a decade I am down to about 30 orders left. When this stuff is gone - it's gone. I know of no other 5160 in this dimension. It was a special mill run at the time it was made.
    Over the next couple weeks I will have two more boxes cut up to sell.
    It is cut into 1 foot long pieces and shipped USPS Priority Mail to keep costs down.
    At $225.00 it's a bargain.
    This stuff has made some incredible knives and hatchets and shop tools.
    I used it for my JS performance test in '08. As have many others.
    Let me know!
    You get 19 pieces/1 foot long.

     

    mNrIzOF.jpg


  2. 1 hour ago, J.Thompson said:

    Karl,

    I'll take a box.

    just let me know when and where to send the money

    Thanks,

    John

    You got it. Both are now sold.

    You can send the $225.00 either through Paypal at my email address, or you can send me a money order.

    Karl@andersenforge.com.

    Of course, if you send Paypal, just send "friends and family" without saying anything about a purchase.

    I'm really busy getting ready for the knife show in Little ROck and may not get it out until I return.

    Thanks


  3. I have been selling this 5160, little by little, for years.
    I have a dwindling supply. But I still have some to sell.
    I will have 2-3 boxes available somewhere around the 19th or 20th in two weeks.
    First ones to say, "I'll take it!" get the box.
    The $225.00 is total $$ and I ship.
    19 pieces, 12" long, of 1984 5160 1 inch square. 19 feet gets me in just under the PO limit of 70 pounds for Flat Rate shipping.
    I know of no other existence of 1" square 5160. It makes great small hatchets and axes.

    mNrIzOF.jpg


  4. I got a little tangled up in making a couple Cowboy Bowies - one for a customer and one for the Arkansaw Knife Show coming in a few weeks to Little Rock.

    Both of the Bowies have Transition Damascus blades. The first one with some highly figured Walnut and the second one with Koa.

    Both have hot-blued fittings and are built take down. 

    The last one is a San-mai hunter.

    ijWFlPw.jpg

    TFNvqNG.jpg

    IfWFMAx.jpg

    h1sTw0B.jpg

    qGeYO0E.jpg

    Vs5CN7D.jpg

    7yjBcHn.jpg

    4panLcf.jpg

    1p7lq7d.jpg

    26AOX9i.jpg

    poaD4V8.jpg

    • Like 2

  5. There is a solution.

    Switch to West System epoxy. Before hardening West System epoxy cleans off with denatured alcohol. The alcohol will not effect any finishes on the steel or handle materials.

    You can completely finish all your parts and assemble. Any squeeze-out can be 100% cleanly wiped off with a paper towel and denatured alcohol.

    However, West System isn't cheap. But the supply lasts a lllllllloooooooooooooooong time.


  6. 6 minutes ago, C Craft said:

    Where in the world did you find bakelite in that large of piece to be able to make the entire handle from it!!

    There were some large sheets of this bolted to a wall in a basement building in Wisconsin. It's 1 1/8" thick.

    The fuse boxes - dated 1918 I think - were bolted to the sheets of Bakelite. The building was under re-hab and some of the workers were cutting this up and tossing it in the dumpster when a friend of mine, who was part f the re-hab, noticed this and had them throw the pieces into his truck instead!! I was lucky enough to get some.

     


  7. I figured I'd toss in a few knives I've been working on lately.

    Here's a San-mai with Ringed Gidgee and Mammoth tooth:

    SMMTaa-1_zpscumsjtuz.jpg

     

    SMMTbb-1_zpsqrbafqmy.jpg

     

    SMMTdd-1_zpstbbv2oqp.jpg

     

    SMMTcc-1_zpsfvkk2si2.jpg

     

    A Transition Damascus Bowie with Koa and wrought iron:

     

    TDdd-1_zpsyr9qqxzt.jpg

    TDee-1_zpsaruark35.jpg

     

    A San-mai hunter with sentimental Walnut provided by the customer:

     

    SMH1-1_zpsmy5yy8by.jpg

    SMH2--1_zps7lazsg9m.jpg

     

    Cru-Forge-V and African Blackwood:

     

    ABHcc-1_zpsb9o9akun.jpg

     

    ABHdd--1_zpsyarkxqie.jpg

     

     

    • Like 1

  8. I have a minimal supply of 100+ year old golden Bakelite which I've used many times.

    I've never really liked it when I attempted a polished finish. I just take it to a 800 or 1200 grit finish and then rub out with 0000 steel wool. Rather pleasing.

     

    DSCN2148-a-1x_zpsfbixkmf2.jpg

     

    BBa1_zpsbc657829.jpg

     

    Bduo1_zps4e6ebcca.jpg


  9. I've decided to sell some of my 5160 stash.

     

    Here's a write-up I gave it on Facebook:

     

    1" square 5160 - $220.00

    Please read carefully:
    I acquired a large supply of this 1" square 5160 10 years ago. Not only myself, but others have used it and found it to be excellent as far as 5160 goes.
    I have the specs and will post them at the end.
    Now this information is important - I know of no other 5160 in this dimension.
    In 1984, a company who manufactures agricultural accessories were developing a piece that required them to have a dimension of 5160 that they could not find. So, they went to a mill and had their own made - what I'm selling is it.
    Shortly after receiving their steel from the mill, their process changed and the 1" square was no longer needed.
    It got piled up behind the factory and remained there until I found it 10 years ago. So, I bought what you see in the picture and still have access to some more of it.
    Keep in mind, that this will not be a continuing supply - when it's gone - IT'S GONE!!
    This is the important part - it has spent most of its 30+ year life span outside in a stack.
    It's rusty.
    It has pits.
    But you'll find no other like it - anywhere.
    I have done just a little searching and about the cheapest you can find even just 1/4" flat stock is $4.00/lb or more.
    I've seen as high as $8.00 a pound for round stock.
    I'm selling mine for $3.00/lb. And I'm doing that because it's not perfect steel - rust/pits.
    That said, even after just a few heats and scale removal, you are below the rust.
    A little forging and grinding and the rust becomes a non-issue.
    Part of that price also means I am only selling it one way - in 1 foot pieces in a Flat rate box.
    19 feet of this stuff + the box gets me in just under the 70 pound limit for Flat Rate. If I go 20 pieces I go over the limit.
    And selling a full box and after disclosure of the rust allows me to sell this stuff for 3 bucks.
    By buying this steel, you agree that you understand it is not perfect.
    It is nearly all just like in the pictures.
    No complaints - no refunds.
    I'm almost giving this stuff away.
    I have enough for about 50 orders.
    When it's gone it's gone.
    Of the five shown here, only four are for sale. One is already gone.
    You secure your box by stating your intention in this post.
    Just consider them numbered 1,2,3, and 4.
    Read the posts ahead of yours.
    When you see all four sold - these are gone.
    I'm NOT!!!! taking orders.
    I will only sell them as I list them here.
    I will also be selling on 3 other web sites and Instagram.
    I will not be selling everything here on Facebook.
    I take money on Pay Pal. Do NOT!!! pay any money until you hear back from me with instructions on how to pay.
    Let's see how these first four go.
    Use your imagination and think of all the different things you can make with this dimension steel.
    It makes great hatchets.
    I may come back and alter this post as needed.

    I had a spectro analysis done when I got it:
    C - 0.61, MN - 0.87, SI - 0.22, CR - 0.71, MO - less than .014, NI - 0.05, CU - 0.21, V - 0.03, N - 0.0048

    5160aa-1_zpszpf3afzy.jpg

    5160bb-1_zpsxvwhzmv2.jpg

    5160dd-1_zpslj05txfy.jpg

    5160cc-1_zpshdjmaswr.jpg

    mm2-1.jpg


  10. They were actually making that thing when I got mine in '96.

    It's better than having nothing, in my opinion, yet I know of a couple guys who have made quite a reputation using one.

    After i got my first Bader BIII in 2000 I always referred to my Grizzly as a $400.00 pencil sharpener.


  11. Very fine blades! Im especially enamored with the 5 bar twist Bowie looks like the blade is made of braided cable. The Tasmainian Blackwood is lovely too!

    Check out this picture from my phone. Not high quality, but confirms your statement:

     

    RickS-1_zpsqymiykaf.jpg


  12. Thought I might toss up a few I'm taking to Atlanta on Thursday.

    (It would be great if some of you could stop by 8-Q and say hi.)

     

    First one is a Spalted Pecan Bowie with a San-Mai blade:

     

    SP1c-1_zpsodtlwqys.jpg

     

    A five bar Turkish Twist with Ringed Gidgee:

     

    TT1c-1_zpsoslgv9sv.jpg

     

    A San-Mai hunter with Bakelite:

     

    BEDC2-a-1_zpssyekgjle.jpg

     

    A single twist hunter with 3720 year old Bog Oak:

    TW2-a-1_zps6lgrijg3.jpg

     

    A Ladderd Ws hunter with stabilized black ash burl:

     

    Ws2-a-1_zpsjrmnkic2.jpg

     

    And a W1 hunter with stabilized Tasmanian blackwood:

     

    TB3a-1_zpsychccpch.jpg

     

     

     

     

    • Like 1
×
×
  • Create New...