Jump to content

Matt Gregory

Supporting Member
  • Content Count

    243
  • Joined

  • Last visited

Everything posted by Matt Gregory

  1. WOOHOO!!!! Look what I got: My friend finally got the chance to turn the cushions to the taper I needed, and here's a picture of one! He made 5 of them for me (one spare), and now I've really got to get moving on the helve - man, I wish it wasn't so busy at work! The notches are due to the fact that they had an existing mould that they used for this project, and I can't imagine it affecting the performance of the hammer. If these work out for this project, I'll find out if they'd be willing to manufacture these for other folks. MANY MANY thanks to Joe Divissich and the cre
  2. Keith Kaiser, the human Switzerland of every practical joke: Had a couple good long talks (that are never long enough!) with Dick Sexstone, maker of some of the most creative folders: Josiah Boomershine, I really can't wait to see the work that comes out of him in the next few years! I missed too many chances to photograph people, and too many photos I took turned out poorly. Ah, well... hopefully next time. FINALLY, here's the biggest thing to happen to me on this weekend. During the knife show on Sunday, my friend Paul LeTourneau was setting his wares out
  3. The next bit will be some portraits of some of my favorite folks from the show, in no particular order. Mace Vitale, hogging a forge to make a sword for next year's Ashokan sword event... Aldo Bruno, the New Jersey Steel Baron, showing the kids how it's done: One of the finest people in all the world, my pal Sammy Salvati: Butch Harner, I need one of his straight razors. Call him and tell him to give me one, please: Good ol' Justin Mercier in his skirt - ahem - kilt: Kevin Cashen always looks at me this way: ... of course, maybe it's be
  4. Dave Martell did two different demonstrations, predominantly involving kitchen knives and their design, as well as proper sharpening practice. An animated speaker, he makes his living sharpening cutlery: Here are some highlights of the knife show that was held after the final demonstration on Sunday. Turnout was high, and it appeared as though lots of things changed hands... Tim Zowada straight razors. I'm pretty sure these two were spoken for, and brought only for example. Stunning! J.D. Smith had some work on hand from he and his partner Josef Shnayder:
  5. Rick Barrett and his apprentice Josiah Boomershine gave an exceptional demonstration on habaki engraving technique. Josiah did all the work, with Rick adding commentary and explanation for historical background and modern application. Here's Rick and Josiah, with Nathan Zowada in between running the video camera: My personal straight razor had been pushed past it's safe effectiveness, so I took this weekend as an opportunity to have Tim Zowada show me his honing and stropping technique. When he finished, I stole some cool peppermint and tea tree shaving soap from B
  6. The 2010 Ashokan Bladesmithing Symposium was this weekend. For me, this is the most important knifemaking event of the year. The openness, willingness to share by all involved, the cameraderie - and the shenanigans! - all make for an incredible weekend of education and entertainment. This year was particularly important for me, personally, but I'll save that reason for last... Held on the Ashokan Field Campus in Oivebridge, NY, the settings cannot be more beautiful, and the weather was PERFECT. Here's some shots I snapped: I started the weekend by taking a hike with my wife
  7. Great shots! I haven't been in Algonquin in... omg - almost 25 years! Left almost every drop of blood in my body with the black flies on several long canoe trips, and got frostbite not once but twice on some snowshoe camping trips (some of the scariest times of my life, I might add). I've always wanted to return, but never seem to find the time - guess maybe I should be making time, no? Thanks for sharing!
  8. With Ashokan coming up in a week, I figured I ought to give our very own ALdo Bruno - The New Jersey Steel Baron - a call to get my order for some stuff in. I've been fooling around with tomahawks lately, and sure enough Aldo's got some 1" square stock in 1080 that'll fit the bill perfectly. I'm down to about 6 inches of the gorgeous 3/8" 1095 stock I got last year, so I asked him to bring me some of that, too - stuff makes great hamon, which I mentioned was my goal. "Hamon, you say?" queries Uncle Aldo. "What do you want 1095 for that for, when I've got some fresh W2 coming in?":D:D:D
  9. Here's a video my buddy Sam Salvati found of a Bradley hammer still in operation: http://www.youtube.com/watch?v=hYigQPJalXE
  10. No excuse - flights are too damn cheap! Sell a knife and get out here!
  11. Dude, you ARE helping firsthand! You've been a huge asset for me, bro!
  12. So after killing a couple hours letting fish no larger than the lures I was using stare blankly at me, I decided that I just wasn't going to wait any longer to either wreck this old girl, or continue forward. I can't justify getting a custom tap cut (especially if there's a chance that all that will happen is that the blunted, smeared threads that are left in the lower cushion cup are just going to fall out!). Seeing the damage on the original adjusting bolt (not sure what caused it to begin with), I filed the first two thread's worth off, and blended the existed threads smooth to use as a thr
  13. If I had the money, I'd own this. Email me with a list of materials, I'll see if I can't at least get you some of the things you might need in the 'brotherly knifemaker' fashion!
  14. All right, gang... this was done under extreme duress, but I've etched the blade after having too many people responding with subtle hints and clues via email such as: "ARE YOU OUT OF YOUR MIND?!??!?? SHOW THE HAMON!!!!!!" Here it is... if the buyer prefers it without the etch, I will be more than happy to return it to it's previous state. Please remember, this was done without the use of clay - the entire point to this method is it's randomness. What you see is exactly as it is - what may appear as scratches are simply part of the results. Enjoy!
  15. There were so many noteworthy experiences with the making of this knife that I've been wrestling with selling it for months. The blade is 11" long, with an overall length of 16-1/4", of 1095 which was heat treated using an unusual method of clay-less hamon creation. The guard is mild steel, with a domed stainless steel pin through the handle. The thickest point of the spine is @ 1/4". The blade leans just a pinch towards tip heavy, as I feel a big blade like this ought to be, balancing about an inch in front of the guard. I struggled with etching and polishing this blade, never achie
  16. Hey gang! I finished scanning the manual that Phil Cox sent me, and I'll be hosting it here, for all to download: Bradley Cushioned Helve Hammer Manual It's supposed to be hella hot today, so I might start work on a dedicated website for the hammer. We'll see...
  17. I know it, Ty... it's not like it was when I was 155 and entirely bone and gristle. Now it's all flab! I kind of worry that I don't qualify for NABS anymore - did we set a weight restriction on it? I can't remember... haven't talked to you in a while, my friend - hope you're doing well.
  18. So here's some updates... so far, the only real issues have just required some serious force and lots of sweat equity. The lower cushions sit in the seats shown above... however, they've got a threaded rod with a jamb nut under them, and as you can see from the picture, it really doesn't look like anything is supposed to move. Except it does, of course! I had to remove the bolts entirely (the back one was lots of work, but not too bad) then insert a 7/8" bar in the hole and break it free from underneath with a 10lb. sledge. Now, many of you have never met me, so before any of the folks gunnin
  19. Getting the lower die free of the anvil was nasty. The wedge had rusted in place and basically become one with the anvil. LOTS of kroil, sledging, weeping, and cursing later: The placard on the front of the anvil: I just heard from a friend of mine that works for an industrial rubber company that the replacement lower cushions he's making for me have been poured and cured, and are now awaiting final machining to shape. Next step is to get some rock maple for the helve! ...stay tuned...
  20. As you can tell, the poor lil' girl was not in the best of moods. I acquired a slugging wrench to free the jamb nuts for most of the adjustment screws, as well as the nuts and pitman bolts for the eccentric shaft. The wrench and a 10lb sledge made wuick work of the nuts, and my spirits rose. Here she is sitting at my house, glistening with kroil. One pitman bolt out: The bolt: A cushion seat: Upper cushion threads getting cleaned: Starting in on the bearings: Showing the eccentric arm in place, the slip sleeve and pitman arm were fused
  21. Almost a year ago I did a trade for some things with my PLB Mikey Spangler, and this hammer was the big part of the deal. Other than Paul LeTourneau and his lovely bride getting it to my house last year (in August), the only work achieved on it until recently was to kroil the bejeezus out of it in hope that some of the rusty relic would break loose. The last patent stamp date on it is 1909, and that seems like an historically plausible date of manufacture. These first photos were taken as the machine sat in Fairhaven, MA. It was kept outside for approximately 5 years before I got it, and who
  22. Actually, Ric, I suspect it's a bit of the change in market, as well as a shift in philosophy and ownership for these folks. The previous owner of NSM signed the company over to the employees in 2004, I wonder if that had anything to do with it? I've yet to see them be anything other than accommodating... maybe you should call them again!
  23. Aldo negotiated for more than just the lot of L6, though... here he is meandering through some of NSM's CPM stock that's already been rolled and cut, and ready to ship: I keep hearing rumors that Crucible steel is no longer available - folks, nothing could be further from the truth. The mills are running, the steel is flowing, and brother, these guys are rolling it! CPM-S30v: CPM-154CM: CPM-S35VN: D2, CPM-3V, 440C... ...and Uncle Aldo picking his stock to sell to us! It was fun to be an observer - Aldo was like a little kid!
  24. Another project they've been doing is mating aluminum to stainless steel. Tricky, to say the least! Here's a shot of one of the scraps from the latest run: These are solid blocks of 6AL-4V titanium - and yes, those are the weights marked on there (420 lbs, etc): Here's a shot of one wing of the yard: http://gallery.me.com/totalnrg/100613/DSC_0012/web.jpg?ver=12750716030001 You think our grinders are expensive? Try the new Timesaver these guys just invested in! Just shy of a million bucks! Timesaver's on-sight technician was in from Denmark doing the final adjustments
×
×
  • Create New...