Jump to content

MassArtTom

Members
  • Content Count

    297
  • Joined

  • Last visited

Everything posted by MassArtTom

  1. Hahah yea, also, I can say that any sort of idea that anyone knew what the fuck was going on during a close quarters sea battle seems nonsense, because theres no way anyone could see anything at all, and the inside of the ship had to be as close to hell as you could get. Also, the relative drop in velocity of a cannonball which when fired from this cannon was around 360m/s, which only dropped to between 325-300 after penetrating 80cm of solid oak. Unbelievable power on these guys.
  2. Hey Everyone! Got some new pieces for sale, pay pal and I'll ship anywhere. Once again, all forged my myself up in New Hampshire. The Butchers Bowie. 5.5" 1095/15n20 Firestorm blade. Brass and Bubinga handle, 11" overall. $900. "Blood Ash Fighter" - 7" 1095 Blade, Brass guard, stabilized ash handle, 14" overall. $700 "Blood Ash Chopper" - 10" 1095 Blade, Brass guard, stabilized ash handle, 15.5" overall. $700 Thanks for checking it out!
  3. Check out the blog! its in reverse numerical though, from top to bottom, so it doesnt read right but you can get the picture! http://www.vasamuseet.se/Creating-the-Cannon I got really lucky haha.Very much in the right place at the right time. Well, the target was only ever at about 100m, and we fired about half of the shots at that, and then they also did half the shots down range, and it was all collected on radar, so I'm assuming that they will have an accuracy cone, this one tended to shoot low and right a little bit, and at 100m, they were grouping them in about 2.5ft. G
  4. Hey! So, I don't think I ever updated this project on this forum. For those of you who don't know, I was responsible for all major parts of the fabrication of this cannon, the pattern, the mold flask, the cannonballs, the carraige, I had to reverse engineer all of it. Which is 3000lbs, 10ft long, and fires a 24 pounder solid iron shot 2 miles. Then we fired it, 54 times on a ballistic proving range called Bofors Test Center, at a replica of 16th century warship hull made by the museum, which was 10 tons of solid oak. Enjoy!
  5. Axes now going down to $150.
  6. I've got 2 new ones! My paypal is tempestcraft@gmail.com, I can also take personal checks and I'll ship wherever. 1095 bit, 1018 body. 1.25 lbs / 800g ish. 4" / 10cm blades. $200 head, $300 Hafted, plus tax and shipping. 1095 bit, 1018 body. 1.25 lbs / 800g ish. 4" / 10cm blades. $200 head, $300 Hafted, plus tax and shipping. Thanks for looking guys!
  7. Thanks everyone! Dropped some of the prices!
  8. Hello! Got 3 pieces here. 10.5" Pinstripe Damascus, bronze, zebrawood, 16" overall. $600 10" Pinstripe Damascus, bronze, zebrawood, 15.5" overall. $600 6" Pinstripe Damascus, Katalox and bronze handle, 11" overall. SOLD
  9. Thanks Dave! Its all 15n20 and 1095. its a 10 strand construction, 10 pieces of the same steel oriented in different ways, 5 on each side.
  10. Thanks! Well, so far so good, they've only used it twice and my parents aren't professional chefs, it shaved a roast beef round real thin?
  11. Made my parents a chef-esque kitchen knife for christmas, 10" blade 1095/15n20, bronze and redwood burl! Critiques are certainly welcome. And orders too. haha
  12. A piece I recently just finished up and had shot by Coop. Handle is 22" curly ash, with bronze details. Head is a 4" cutting edge, 8" over all length, 10 strands of 15n20 and 1095. I am the sole author of this piece, I forged the steel, all the fabrication, and carving. Also, I cant think of a clever name for this one, any one have any ideas?
  13. A piece I recently just finished up and had shot by Coop. Handle is 22" curly ash, with bronze details. Head is a 4" cutting edge, 8" over all length, 10 strands of 15n20 and 1095. I am the sole author of this piece, I forged the steel, all the fabrication, and carving. Asking $2500 for it
  14. Hey guys, got some little guys, some I've listed before. 1095 Hunter, 416 stainless gaurd, tulipwood handle, 4" blade, comes with a tooled leather belt sheathe. Asking $450 or best offer! 1095/15n20 Cleaver, bubinga handle, 6" blade, small utility cleaver, weighs just under a pound, comes with a leather edge protector. Asking $700 or best offer! 1095/15n20 Kitchen utility, bronze and katalox handle, 6" blade. Under an 8th thick, pretty much a big straight razor, I've sold a few similar ones and had great feedback as prep knives! Asking $550 or best offer. Send me a message
  15. Price drop! I didn't post a price before! but now this guy is 650. Wooo.
×
×
  • Create New...