Jump to content

Todd Miller

Members
  • Content Count

    258
  • Joined

  • Last visited

Community Reputation

1 Neutral

About Todd Miller

  • Birthday 07/08/1952

Profile Information

  • Gender
    Male
  • Location
    Quilcene Washington
  • Interests
    Teaching young unns to get along in the world. My wife and I like to travel and sail in roughly that order.

Recent Profile Visitors

939 profile views
  1. Thanks for the responses. I'll check my thermocouple and try soaking longer. Those seem to be the most likely culprits. Todd
  2. A little more detail on my process. Like I mentioned the first weld of the stack seems to go easily. I just use the steel the way it comes from Kelly Cupples. The 15n20 is shiny and the 1080 is cold rolled so it is pretty clean too. After the first weld Then I draw it out and grind it down to clean metal which goes blue from the heat. After cutting I stack and tack weld the corners. Heat to glowing and flux with borax. Heat to 2150ish and give it a light squeeze on the press. Heat again and squish harder with the press. Heat again and hand hammer around the edges. Then I have gotten paranoid s
  3. Yeah Dave, that's what I find frustrating they should be easy to weld. I don't think flux entrapment is the problem. In fact where I welded the split back together it is welded in the center but not the edges. The Ws are holding up fine. Do others let their billets cool between welds so there is no oxidation?
  4. Brian- I am using 1080 and 15n20 and the. 1080 is on the outside.
  5. I haven't been on this forum for a long time but I am now getting into making kitchen knives. I have welding problems with my Damascus blades. The first weld of a billet goes smoothly. I have done it both with and without flux with little trouble. But the second and subsequent welds tend to be problematic. I always grind the scale off and the only thing I I don't always do is let it cool completely before stacking it. So often there is blue oxidation when I try subsequent welds. I am using a reducing gas forge and weld between 2150- 2200. Usually I can get it to weld to set but it takes far m
  6. Amazing piece of work. I needed some inspiration and that sure helps. Thanks Todd
  7. This doesn't really answer the original question but I thought it was germane. We were in Japan a couple of years ago and there was a big swap meet/farmer's market. This booth was there selling nothing but sharpening stones. Go figure. They were expensive. BTW I use Japanese water stones that I have had for years. A couple of mediums and a very fine. They are synthetic and not too expensive. Todd
  8. It's a real job. Maybe everybody in the world has already seen this but I thought I would share it here. Sam??? http://gothamist.com/2014/09/17/blacksmith_wanted_nyc.php Todd
  9. Thanks, it's better to make a small knife than no knife at all. We just got back from the wedding too. Todd
  10. I haven't posted anything for a while, as I haven't made anything for a while. This is a little wedding present. Kingswood handle, random damascus. Todd
  11. It was their dog. At the time my wife who can slerp through anything, told me I'd find it funny eventually and I guess do. It is their country after also who am I to complain.
  12. My wife and I spent three weeks in Iceland this summer. This was a blog post I wrote about one experience. Hope you enjoy it. Todd Children, Camping and Insomnia in the Land of the Midnight I have trouble sleeping, not so much getting to sleep but rather staying asleep. When asked, I euphemistically say that I have sleep issues. My son calls them my night terrors. But whatever you want to call the condition, nine out of ten experts agree that when one has trouble sleeping it is important to maintain a regular sleep schedule. So that is what I tried to do on our recent trip to Icel
  13. How about Shindaiwa? I'm not trying to get into a debate either. When my son was a senior in high school he got into the Battlebot craze. He picked up a mid-sized Shindaiwa at a garage sale, paired it with a 24" diameter sawmill blade and went on to some fame and a little fortune with "Sunshine Lollibot." He was just a kid and he did really well considering and got to the eliminations where his match was featured on TV over and over because he lost in such a dramatic fashion. Here is the most famous of his fights. https://www.youtube.com/watch?v=KN24y-FJeMQ Well for the next season he ap
  14. Thanks for the input. Last week was the end of the semester and with grading and all I haven't had a chance to reply. I think next time I'll recommend one tuyere. The reason we went with two was that with the last smelt I did on my own I had some trouble with a single one clogging up. So I figured that having two would be a backup. Unfortunately the angle was wrong and I think the air didn't burn the charcoal down low enough and so it allowed the slag to build up in front of it. The reason he was poking it in the frosty picture was that was he had just lit it with kindling. In the later
  15. A couple of years ago I offered my Materials Science students extra credit if they wanted to build a bloomery and try to smelt some iron. I showed them a video of one of the times I tried it and there was some initial interest but it soon faded away. Last year I made the same offer and one fellow, Josh, got as far as mixing up DARC dirt from Spanish Red iron oxide glaze. Josh liked the class well enough to take it again this year. It seemed silly for him to just repeat it so I asked him if he wanted to try the smelt again instead of most of the normal classwork. So he built the furnace,
×
×
  • Create New...