Jump to content

ruggero

Members
  • Content Count

    390
  • Joined

  • Last visited

  • Days Won

    10

Everything posted by ruggero

  1. Hi, i grinded flat the wrought for the handle. And i begin with the blade. [/img] [/img] [/img] [/img] This evening i bend the Handle. Ruggero
  2. Hi guys, i forged just down the wrought for the handle from 15 to 6-7mm. Now the outside dimensions are enough to bend the handle. [/img] [/img] With a bit acid : [/img] [/img] [/img] Ruggero
  3. I want bent the wrought from one piece. 4-5mm thick. The blade 5-6mm thick. Ruggero
  4. Hi all, i want make a Higo. Handle from wrought iron Blade sanmai wrought / 1.3505 Total lenght : 205mm [/img] [/img] [/img] [/img] Ruggero
  5. Here a pic from outside : [/img] Ruggero
  6. Hi all, i have finished my knife : [/img] [/img] [/img] [/img] [/img] Ruggero
  7. Thanks Guys for all the nice coments Ruggero
  8. Hi guys, here the finished game with the stones in start position. [/img] [/img] [/img] Ruggero
  9. With the stones ( color glass ) without fieldlines. I changed the form of the ships a bit. [/img] [/img] Tomorrow i make the fieldlines. Then the game is ready. Ruggero
  10. Hi guys, here the rules for this game : [/img] [/img] [/img] [/img] Ruggero
  11. Hi guys, the border is carved and burned. Now i want burn in, on all four sides a viking ship. If i have make this, i carve the fieldlines. [/img] [/img] Ruggero
  12. And a bit more : The inner cyrcle is only burned. It is very difficoult to burn straight [/img] [/img] Ruggero
  13. Hi all, i am making a gift for my wife. I make a ancient Viking boardgame. The HNEFATAFL . The board is from oak wood. 48 x 48 x 3 cm. [/img] [/img] [/img] Carving with burned backround a round the board. In the middle a round viking knotwork. And in the middle of the four sides a viking boat. Ruggero
  14. Hi, the Knife and sheath are finished. The customer ( a member of a swiss piperband ) sticks the knife in his sock if he dress the scottish clothes. Sorry for my english I hope you understand what i want say. [/img] [/img] Ruggero
  15. The knife is finished : [/img] [/img] [/img] [/img] Ruggero
  16. Hi guys, the front and back piece is glued. I want to finish the handle before i glue the blade. [/img] [/img] Ruggero
  17. Hi, here a bit progress : [/img] The blade is harded, not etched. [/img] Ruggero
  18. Hi Kevin, the fittings are from stainless steel. Sorry for the bad pic. Ruggero
  19. Hi all, here i a make a Sgian Dubh for a swiss piper band member. Blade from damascus ( to hard ) 1095 / 15N20. 100mm long, 28mm high and 4.5mm thick. Tropical woodhandle. I not remember the name. 100mm long. Stainless steel fittings. Made from finger rings. [/img] Ruggero
  20. Here the finished sheath : [/img] [/img] [/img] Ruggero
  21. And here the finished sheath without beltloops. [/img] Ruggero
  22. Hi James, a beautiful blade. The fittings to. But i am sure, you can make a better handle. I think it is to long an it have to mutch curves. The handle have not the same level at the blade ! Ruggero
  23. Hi guys, a customer wanted a sheath for his seax. Wrought iron fittings with brass riverts. Leather black. The second belt loop holder its to make. in work : [/img] Ruggero
  24. Hi Greg, fantastic blades !! Are the midle dagger aviable ? Price .. dimensions ? Ruggero
  25. Hi all, this time i make not a knife. A customer ( woman ) wanted a case for here eating set. [/img] [/img] [/img] [/img] Ruggero http://messermacher-ruggero.ch
×
×
  • Create New...