Jump to content

Austin Mys

  • Content Count

  • Joined

  • Last visited

  • Days Won


Austin Mys last won the day on April 26 2017

Austin Mys had the most liked content!

Community Reputation

13 Good

About Austin Mys

  • Birthday 12/05/1995

Profile Information

  • Gender
  • Location
  • Interests
    Martial arts (Tung Soo Do is my base), piano tuning and repair, playing piano, Japanese blades, western vaquero horsemanship, leatherwork, woodwork

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. hello mr. austin what kind of steel you used on your katana?

    1. Austin Mys

      Austin Mys

      Hi there, Ive been off the forum for a while and just now seeing this. I've been using low manganese 1075 from Aldo and love it.



  2. I have come very far in my research of these swords as it relates to the construction thickness wise. This due to finding incredibly detailed photoshoots on Japanese websites of sword dealers. I discovered the following: The originals were thick. The most unaltered example I could find still had a thickness of near .34" at the machi and around .216" at the kissaki after 500 years. Most the swords without bohi were around .3" at the machi and .24-.25" at the yokote, though I haven't found a blade without bohi in such healthy condition as the one I found with bohi. The precision of
  3. Thanks Chris! On Suburbs... they are certainly are not ideal! I am thankful that my neighbors have been very supportive. though I also have other more spacious places to go when I am planning on a noisy week (my whole setup is currently very portable). Some of my neighbors are close friends, most are gone at day jobs during most my forging hours. Lately I've been too focused on my main job (piano tuning) to do much smithing anyway, so the occasional day setup in the driveway isn't interpreted as such a big deal. Kooky... I have a feeling that a handful may think that! Most the men who've
  4. Alright, after a lot of various life circumstances keeping me from starting sword # 2 (including my old forge being totally worn out and building a better one) I have finally got the ball rolling again! I am once again working with 1075 from New Jersey Steel. Here is the sunobe (preform) finished yesterday: Hizukuri got off to a bit of a rough start as I haven't forged since January... I finished half the blade then took some rest and went back at it the next day. I finished the rough forging today. Next I will go back over all the surfaces to make sure
  5. For hard use I prefer a fine satin, around 1200 grit to minimize rust and friction during cutting. For looks, I like Japanese sashikomi finish (you'll have to google, I don't have a great photo). This knife is an old knife with some combination of the two... Most my user knives get a 5-600 grit satin though to keep the cost down.
  6. I've debated on whether to start a new topic for the new sword, but since it is the same project to me, and the discussion is still going, I think I'll just keep it all here for simplicity. Realizing it would be hard to organize photos of forging techniques as I work (take tons of extra time) I decided to just show some things in diagrams. I'm currently on vacation, so I've got lots of free time to do that kind of stuff right now anyway When you forge any single edged blade, you run into the issue of induced curvature due to the expansion of the edge. With knives, we use a preform wit
  7. Hi Kevin, what you are seeing was only visible after an hour or so with hazuya under very careful lighting, it's caused by ashi. All the extra details became invisable with smallest use of nugui (powder grit/dye of various recipes suspended in oil). In a typical hybrid polish it looks more like you're probably used to, bright white with a distinct habachi and pretty boring underneath the habachi. Hazuya work shows all the little details created by ashi, but hazuya also clouds the ji which makes the ji look white against the ha. Which is why in a full polish jizuya is normally used to make the
  8. Thanks Caleb, I hope to share much more in the future! I have already started my work on katana 2, and have adjusted my forging techniques while working on tanto and other knives. I hope to share some more by the end of February, including some observations on forging straight that I think will help people new to Japanese blades. For now, here's a sneak peak of where I'm heading with the hamon Hazuya finish on this knife to show all the hardening details -Austin
  9. Obviously each part of that knife is downright impressive, but out of it all I really love the work you did on shaping that handle. I hope to get good enough to produce so many facets and curves with so much control some day. Reminds me of some carved handles on old swords, but taken to another level. Outstanding all around!
  10. Wes, exactly! Just a bummer when you get to heat treat and things go down hill, but I guess it's an inherent part of the craft whenever you do something new. Kevin, thanks for sharing that! I think this is the missing piece of the puzzle for me. I finally managed a decent hamon (over 3/8" high) after getting the steel a little hotter, but it still wasn't as high as I would have normally expected. When I have smaller knives I usually soak for at least 5 minutes, but did not think it would be that necessary with the 1075. Plus I had a heck of a time getting it all up to temp... I'm really wi
  11. I'd also like to say thank you to everyone who has taken a look, and given input to this thread. Making a katana has been a long time dream and passion of mine, and this has been a very fun and rewarding process even though this blade wont have so glorious of an ending. It has certainly jump started me on the path to making something I can be very proud of. I hope I have provided some level of valuable information to people here, and hope to refine my abilities to share knowledge in a more streamlined fashion in the future. Thanks again! -Austin
  12. Well, I said I'd quench until I get a good hamon and that's just what I did! ‚ÄčThe sword itself is bent out of shape past any amount of worth, but it still had value for learning. I ended up quenching 3 times last night, once with clay, two times without. After the first which yielded the same result of too low a hamon near the point of percussion, I brought the steel up to 1800, then 1600, then quench heat in an effort to eliminate the grain size variable that had me worried. Same Result. After the 3rd try, which yielded the hamon bellow, I figured out my problem... Up until this point the on
  13. Hey Connor, that's exactly what I did. I need to adjust the hot spot in my forge (I'm thinking of converting it to a double burner) so I don't have to draw the blade in and out as much, that way I can run it closer to the exact temperature I need and the edge won't heat up too fast.
  14. Haha! Exactly Brian! Unfortunately, I may have to scrap this sword Hamon was not high enough, so I forged the curve back down and normalized at 1600 thinking I got the grain too fine. Same result on the next quench. Took me a third try without (this time no clay) before figuring it out. The ha and mune were up to temp but the ji was not as it turns out. This was partially on purppose trying to go for utsuri (a blackish area above the hamon that looks like a reflection of it), but that heat zone was exaggerated too much. I was able to see utsuri though, but could't get it on camera with su
  15. It's finally born! 26.125" nagasa, 1.825", a healthy sword with lots of personality! It just didn't want to curve downwards this one! I think this is due to needing more oil in my quench tank. I'll try to get some pics of what the hamon looks like tonight, I've been traveling with all my gear so I need to get my grinder and stones unpacked from the car before I can clean it up and get a look...
  • Create New...