Jump to content

larry harley

Members
  • Content Count

    532
  • Joined

  • Last visited

Everything posted by larry harley

  1. thanks for watching guys dont forget about tonight National Geographic Channel: http://on.natgeo.com/12N9v8W
  2. Howard would make u another for what that one sold for
  3. Tune in again at 9pm EST on Wednesday night for another new episode. If you haven't seen it yet, check out the teaser below. https://vimeo.com/58645930 Hammer
  4. neetneat ax head too much work to fake!!! the folks that owned it were real viking reenactors they were all eat up w/ it they had a club house villege set up and treated us... welll??.. like vikings...!! next week i sword stufffff to death hammer
  5. i cut mellons, gallon jugs and DRY tatamie(sp) matts
  6. here in afew epasodes the turn me loose" the master of mayhem " w a sword.. a damn good one too be sure and watch
  7. the blunderbuss was an awsome piece!!!! and the amo and powder was free:)
  8. i wanna know whats good and whats bad about the show?
  9. the new one comes on tonight watch and i hope u enjoy!!!
  10. hope yall enjoyed it the reruns are tonight and it counts in the rateings!! new show wed at 9:00 i really appreciate all the kind words and encouragement. i,ll be comeing out w tshirts w/ harleyisms ant no dog like an old dog perxactley life is easyer if u plow around the stumps etc etc etc that winchester was head and sholders from what winchester makes now. it locked up like slaming the door on a caddie not like a vw. i think it was the buckhorn sights that whiped jim and adrian they have other excuses why i out shoot them in other episodes too:) and the film don,t really show how dark it was. it was dusk.
  11. did anyone catch the show last night?? feedback??
  12. because of dads t.v. show weve revamped the web sight heres a sneek peek. ive layed in a lot of knives for the premier http://TuneRanch.com/lpk/?page_id=91'>http://TuneRanch.com/lpk/?page_id=91 http://TuneRanch.com/lpk the sight will also have t shirts hats etc when the show airs. Richard Harley
  13. larry harley

    yea

    ITS OFFICIAL!!! I get to co stare in a new reality T.V. show about antique firearms and cutlery. i have loved my job for these past 30 yrs; obsessed w steel and knives swords etc,i never grew up.just keep schooling my self all these yrs and creating. i always felt that everybody else had a job and i got to go play in my knife shop teach my self how knives were made 5000 yrs ago and every subtle nuance ever since. now its took me here!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! if i felt any better it would be against the law.
  14. UNCLOAKING for self defence!!!!!!! so the above pic is Jan. Feb. March.April and May????? UhhhhhGGGG YUUCCKK i think i,m gona throw up!!!! Washing computer screen and RECLOAKING!!!!
  15. don i need u to call me if possible harley
  16. blue u too:) thanks guys and u too rick lol allen i have that magic steel here in the shop along w the magic water i quench in:) i dont put a lot of stock in t.v. and news paper stuffff like that most times its just a love fest and ego stroke which i dont mind:0 every body needs strokn thanbks guys thanks for being my friend we are in a magnificent job if we were only paid magnificentley lol harley luke sky possum
  17. i,m hopeing to do them every yr 2 weekends after the blade show harley
  18. this yr its june 12,13 14 if u are interested in helping or participating let me know harley The weekend of June 20-22, 2008 saw the first of what is hoped will be many American Bladesmith Society sponsored hammer-ins created especially for young men and women under the age of 21. Held near Sevierville, Tennessee at Smoky Mountain Knife Works, on the stretch of land between the main building and the French Broad River, the event was deemed successful by any standard one might choose. This event provided the young attendees with the opportunity to try their hand at forging knives, with one-on-one instruction under an experienced bladesmith. First, of course, there was a talk about safety, and another about the history of steel, where it comes from, and how it is made. Other “chalk talks”over the course of the weekend included knife nomenclature and design, basic blade forging, Joe Keeslar’s unique approach to integral guard blades, heat treating using the edge quench method, mounting handle material and how to sand and finish a blade by hand. In addition to the knifemaking activities, participants were given a guided tour of the National Knife Museum, located within Smoky MountainKnife Works. But just as everyone preferred it, both students and instructors spent most of the weekend at the forges. Students were taught to first form a point at the end of a long bar of steel using the hammer. A distal taper was then hammered out and the point was profiled. The choil was “pulled down” and the cutting edge then formed. At this point, the blade was cut off of the bar and the full tang tapered handle “drawn” out. When the hammer work was over with, students were taught the importance of controlling grain size by normalizing the blade three times, and the blades were hardened using the edge quench method. Blades were tempered, rough-ground and made ready to accept a set of slab handles by the instructors. This process was repeated as often as each student was able. A total of 16 students completed the program, and each went away with at least one blade that was hardened and ready to finish. Some were really productive – in total, the students made 50 blades and all but the very last ones forged were prepared so that they could be finished at home without any special equipment. Students completing the program were: Matt Barker, Walker Boyles, Benjamin Clark, Daniel Clark, Michaela Crenshaw, Billy Hubbard, Christopher Jones, Michael E. Lewis, Allyson Lisenba, Caroline Lisenba, Parker Meadows, Ariel Smith, Aaron Smith, Emmalynne Whitesides, Stelliemay Whitesides, and Tyler Wilson. On Sunday afternoon each was presented with a certificate of participation, an ABS membership pin, and a one year membership in the ABS. Smiles were the uniform of the day, and those smiles were equally shared by the parents and grandparents who spent the weekend watching the young bladesmiths gain confidence and knowledge right before their eyes. Deserving special recognition for their efforts are Kevin and Chase Pipes of Smoky Mountain Knife Works, who went above and beyond the call of duty to host, promote and make this event a reality; Pete Cohan of the National Knife Museum, and of course the volunteer bladesmithing instructors
  19. seems to me i kinda remember oweing one to this guy somewhere up there in the great frozen wasteland of the north:)
  20. ive killed hawgs w almost every blade configuration i can think of old and new (well there's nothing new) short clips long clips no c;lips and 2 edges and i think the sharpened part right in front of the guard (top and bottom)are the most important w one edge and all its clip variation u have to kinda rip down to open a hole and that hole still wont be that long but w 2 edges all u have to do is lever the blade up and down and a slot from 5 in to a foot can be opened up this long triangle shape cut leading to the heart is the ticket i think that ol Blackfoot dag was an awesome weapon and the roman short sword musta been an most efficient killer here also, wide is more important than long when i make hawg spears now i want them to look like long trenching shovel i,m not an expert on this stuff but my buddy that owns the lodge i hunt out of has killed at least 3 to 500 hawgs a yr for the last 30 yrs that's at least 15000 dead hawgs that's a learning lab harley p.s. dale ive sold that hawk to 5 different people in 7 different places and they r all happy:) harley lying possum
  21. thanks lin things in my part of the world r slowing down!!! how bout u if it werent for a few orders from service men id be sucking tubes i have very few gravy orders now and none comeing in and charred wont much else ruin your day any worse than to walk up to a big hawg w a 3 or 4 in. thick shield and to realize u only got a 5 or 6 or even a 7 in blade:) sometimes too much is just enough now ask me why 2 edges!! harley machette possum
×
×
  • Create New...