Jump to content

Alan Powell

  • Content Count

  • Joined

  • Last visited

Everything posted by Alan Powell

  1. Of course a video on YouTube haha I wasn’t a massive fan of the burner plans to begin with but figured since they worked for him and the comments had other people who it worked for I’d give it a shot. I’m not understanding what you’re saying though.
  2. Basically the coupler is inside of the bell reducer at the top of the iron pipe, and is then held in with set screws the coupler holds a cap and I drilled and tapped that cap and threaded in a 0.025mm mig tip.
  3. I’ve been having some issues getting the flame right on my burner, my set up is essentially a 20 psi regulator to flare fittings into a ball valve which is then leading to a coupler held in by set screws, which has a cap drilled and tapped to hold a mig tip (0.025mm) I’ve turned everything all the way and the flame is still red and bellowing like crazy more than I’m comfortable with. Not sure what to do to get m blue flame to be able to control it within the forge. Any help would be much appreciated! IMG_5076.MOV
  • Create New...