Jump to content

Search the Community

Showing results for tags '1095'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


  • General
    • Read before you register
    • Forum News
    • New Board Issues
  • New Work
    • Show and Tell
    • Photography
    • Video and Multimedia
    • Knives For Sale
    • Design and Critique
  • Old Work
    • History
    • Old Masters
    • Library
  • Forge Work
    • Hot Work and Bladesmithing
    • Hot Work
    • Bloomers and Buttons
    • Beginners Place
    • Pinned topics for the Beginners Place
    • Teacher Directory
    • North American Bladesmith and Blacksmith Directory
  • Forges, Tools, Equipment and Materials
    • Tools and Tool Making
  • Finishing, Tips and Tricks
    • Fit and Finish
    • Sheaths and Leatherwork
    • Carving and Applied Arts
    • Shop Safety
    • Non-Ferrous: fittings, alloys, patinas
  • Heat Treating
    • Metallurgy and other enigmas
    • Heat Treating by Alloy
  • Events
    • Events of Interest
  • Discussion
    • The Way
    • Fiery Beards
    • Books, Videos, and other Media
  • Tailgate Sales
    • Tools, Supplies and Materials
  • Hall of Fame
    • Nominations
    • Show and Tell Hall of Fame
    • WIP/Tutorial Hall of Fame
  • Pinned Topics
    • Pinned Show and Tell
    • Pinned Hot Work Topics
    • Pinned Buttons and Bloomers
    • Pinned Tools and Toolmaking
    • Pinned Fit and Finish
  • Maker's Mark Registry
    • Maker's Mark Registry
    • Marks to be Identified
  • KITH
    • KITH 2011-2020
    • KITH 2021
    • KITH 2022
    • KITH 2023

Find results in...

Find results that contain...

Date Created

  • Start


Last Updated

  • Start


Filter by number of...


  • Start





Website URL







Found 14 results

  1. I am a new knife maker. I got ahead of myself and heat treated my blades before I drilled holes for the scales. I did a great job heat treating but now I can't anneal the blades to be able to drill them. I have tried several normalizing sessions. I have taken the blades to critical temp an allowed to cool very slowly. It doesn't seem to matter what I do, it almost seems like these blades are only getting harder. I am using a forge so my temps are estimations at best and am mostly going by sight and color of metal. I took a few of the blades and let them soak at critical temp for about 15-20 minutes before letting them slowly cool. The blades seems even harder. The file still skates across it like it did after the quench for heat treating. Any ideas?
  2. So I gave this a try: San Mai of 1095 core and 410SS jacket. Starting pieces are 3/16" thick and either 5-1/2" or 6" long by 1-1/2" wide I then used the TIG welder to fuse all the edges closed. And welded the billet to a handle. After forge-welding in the press, I ground the edges clean (or sort of clean) Intermediate forging pic of tapering the end to a point. I didn't get many photos during the forging process, but eventually, I went to grinding and HT. Here are three blades at 320 grit finish. The secret lies hidden.
  3. I did a site search on Google foor this topic and only found one discussion that didn't yield much, so I'm asking again. I recently started using 1095 in my Damascus and I have this multi-bar pattern all welded up and ready to accordion cut. I normalized 3X and set the bar to anneal. The bar measures 1-1/2" x 7/8" x 8" Into the Paragon: Ramp up to 1450 @ 250 degrees per hour, hold for 1.5 hours Ramp down to 1200 @ 100 degrees per hour hold for 1 hour Turn off oven. This would not cut on the bandsaw (at least not very easily, it killed two blades before cutting 6 lines each about 3/4" long) A quick call to Hancock, and we decided to try it again. So, I put it back in to the paragon. Ramp up to 1350 @ 200 degrees per hour, hold for 2 hours Ramp down to 1250 @ 100 degrees per hour, hold for 2 hours Shut the oven off. This is even harder than the first one. It is eating bandsaw blades before making a single cut. Any ideas or suggestions? Here is the bar:
  4. Have a quick question. Is it possible to get a hamon besides using clay? Ive never messed with hamons at all yet but seems like i have a faint one going on in my recent blade. its a damascus chefs knife comprised of 1095,15N20 and nickel sheet. any ideas? Heres a picture and ill try and take a better one to show you what I'm seeing. along the edge is a faint shadow. Thanks
  5. Well Its been a while, but I am back in Thunder Bay Ontario and back in the shop. I have finished a half dozen blades or so, and decided to work on something for myself. I also decided to take some pictures to remember the process. I bit the bullet and ordered some 1095 and 15n20 steel to do a Pattern welded blade. I have done low layer count blades in the past and also worked with steel cable, but this was to start with a 21 layer count, and hopefully end up some where around 200 including a 1095 core. If you have any questions or general tips for me, feel free to drop a comment. I got started by making some Mokume Gane for my handle work, though im not sure exactly what I will be turning out. I am not to sure what kind of blade I want yet either, but how much steel I have left after welding will be a big decider there. I make my mokume by welding a little cage around the materials consisting of two U shaped pieces of mild steel. Seems to work ok, might work better to weld both of the U pieces to a section of round stock as a base. I tried leaving the paper wrapping on the discs to make it easier for welding and it didn't seem to cause any problems. So I start my Billet by cutting my stock into little squares, and then stacking them in alternating layers. I plan on wrapping this around a 1095 core, so I am not to worried about which the middle layer is at the moment. After they are cut and deburred, they are cleaned up a little and squared up in the vise. I weld the corners together and get the billet setup to weld a long handle on it. After a quick clean up with the wire wheel I fire up the forge. I can say that next time I will be starting with a longer narrower billet as apposed to the rectangle shape. But live and learn. I get the billet red hot and start on it with my borax setup. I keep heating and occasionally brush of junk and add more borax. On my first welding pass I use solid but lighter blows starting in the middle and then working the edges. Keeping in mind not to forge below a red colour heat. I eventually ended up with a pancake, and I cut the corners where it had been welded so they didn't taint the final product. yay for pancakes! After doing an Annealling process to remove some stress from the piece, I cut my pancake into five pieces and clean up the surfaces on the 6x48 belt sander. Once they were all shiny, I mate them in the vice and welded the corners together as well as reattaching the handle. I will be repeating the first step again, but with more focus on drawing out the billet long an narrow. Once I was happy with what I had, I put it through another annealing process. Next, I cut what I had into two pieces and cleaned up the surface that I was going to weld. I prepped and cleaned my piece of 1095 that was to be the core. leaving the handle attached to a piece of the original billet was an easy base of operations. I seen a video of a smithy putting borax in between the layers of steel when he slipped in a carbon core, so I figured I would give it a try . This time I clamped the pieces together and used wire to bind them. I think I should have used more wire because I had an issue with the pieces separating and sliding slightly. So after repeating the beginning process and completing a solid welding pass, I quickly remove the wire and stuff it back in the fire. Don't need that wire ruining my hard work! I keep working the piece until I end up with a bar well thick enough to make a sturdy blade. It is important to try and work the piece evenly with your hammer blows to keep the core in the center. One thing I was aware of but fail at was hammering it to much. I forged it to close to shape and very little of the 1095 steel core is visible at the edge. Its not terrible but next time I will leave a little more for the grinder. After getting as much scale off as possible I put the steel to anneal. So I begin of my blade forging phase with a fairly clean piece of steel, I try to get of all the scale without grinding away my layers. I will start by forging the tang. Now, I will hammer the point and this is going to be a precurve, so when I start to hammer the bevel it wont have to do as much fixing. I find it helps to work the bevel on the edge of the anvil and push the material away from you with glancing blows. After a beveling pass on each side is done I fix up the profile of the blade and straighten it for the next pass of the hammer. I will repeat this process one more time before working the side opposite the edge to work in a taper. This also pushes the point back down into a drop point. Once I am happy with the over all shape, I give it a straightening pass and heat it for an annealing phase. Well here we go. Isnt it beautiful? lol! After removing scale with the angle grinder, I will clean up the profile of the 2" belt grinder. Then I will take it to the 6" belt sander to flatten out the ricasso and tang areas. Then I will set it up in a filing jig and use a half round file to clean up the tang shoulders and choil areas. Next I reposition the blade in the jig and grind the bevel flat with a 36 grit belt on the 2'' grinder. With blade rough ground I fired up the forge and got my oil heated for heat treating. This blade was annealed, then normalized three times at lower subsequent heats from around 1600f. Then heated to around 1475f and plunged into 140 degree canola oil. I tempered the blade at 400f three times allowing to cool each time. After all that the blade was back into the filing jig and the edge was inked and scribed with a center line. the bevels were ground to 320 grit on the 2'' grinder. Then I cleaned up the ricasso and tang on the 6" belt sander. Now for the hand finishing. Here are the tools I use, just a 1'' wide bar with mounting tape and a shop roll of emery cloth. I mount a piece of wood in the vice and clamp my work to that. Starting with 400 grit and working opposite to the lines of the grinder, I remove all the 320 grit lines on the bevel and the ricasso. Next is 600 grit, and that is worked perpendicular to the 400 grit marks. 600 grit is as far as I am going with this blade. Don't for get the spine and other parts of the blades profile. Now I will clean the blade and git it into the etching solution. I use Muratic acid because its easily obtainable at Canadian Tire. I set my glass container of acid in a boiling pot of water to help activate the acid. Use caution! This creates fumes! So I believe it is best to etch your blade for many short periods (5-10mins) and then remove it for cleaning and progress check. So here is the fruit of my labour thus far. I am going to be starting the guard and spacers next, so tune in again. Thanks for looking, john
  6. walnut scales, copper pins wth high test epoxy, 1095 blade steel with wedge grind, kept it slightly rustic so that it wuld have charicter, full tang, and first attempt at a sellable knife.
  7. Ok I've used 1095 O1 and 1080 for blades but it's been hard to come by but I have a ready supply of 440C stainless can I use this during stock removal or is it useless
  8. Hi all, I've been lurking here for a while, but wanted to share what your collective knowledge helped me achieve. This is my first real attempt at forging a knife. It is my take on a yanagi ba style knife. It is made from 1095 steel differentially quenched in brine for 3 seconds and then into canola oil. I ultimately decided that I liked the hamon better without etching it so I polished it back out. You can almost see it in one of the pics. There are a lot of flaws in the knife, but the pics hide them pretty well. I learned a lot from this one and it won't be my last. Here are a few pics: Here is a test cut video. It isn't up to the legendary edge these knives are supposed to have, but it is the sharpest one in my kitchen... Thanks to all of you!
  9. I'm almost done with my new knife. All I have left is the sharpening. Till I get that done, here's some pics of the process starting with the blade with clay on. The clay I use is Rutland's Furnace Cement. Helpful criticism very welcome. Also, after this knife is complete, I'm going to make a Japanese style straight razor. But the only belt sander I have is the Harbor Freight 1 x 30. So any tips on how to go about doing a hollow grind on one side would be appreciated.
  10. Last night I got home from work at about 5:30 and went straight to the forge. After about 4.5 hours of forging, I then annealed the blade in sand over night. This morning I got up good and early and began grinding. I've only got the rough grinding done, but I thought I'd post a pics as I go. As always, your criticism is welcome, And I appreciate your time! -=James Fuller=-
  11. Kitchen knife I made for the wife. 1095 with paper micarta handle. Let me know what you guys think.
  12. Kitchen knife I made for the wife with paper micarta handle.
  13. Howdy folks, I am happy to announce that I finally have my new shop up and running as good as opening day at Disney Land. So far, in the last month, I have had more failures than in the whole of my knife making experience. I started using new steels (1095 and L6) and experimenting with them to find a good heat treat has been actually a lot of fun. I now have a grand total of 5 broken blades! 1095 blade after the quench. A total of six cracks are visible I had it stuck in my mind after the first broken blade that no matter what, I was going to quench my 1095 in water. It does say in the material data sheets that it should be quenched in oil when dealing with small cross sections, but i figured what the hay! So after learning that my heat colour judging was a bit off, I started to hone that in. After making sure I wasnt over heating before the quench and leaving a little extra meat on the edge, I arrived at a hardened blade. Actually two blades, since I was determined to have a blade survive the quench, I decided to work on two at once. I could see, what I believe to be the line between the hardened edge and the softer spine. I horizontally quench my 1095 in water that has been boiled, but backed of to the point where it stops bubbling. around 130-150 dF or so. I wait untill my blade is a deep red to bright red colour, but staying away from orange hues. Im looking to get it around 1475 dF, give or take. I had been relying on a Analog pyrometer, but realized that it must have been reading off a bit. That, or my thermo couple placement was off. I run a horizontal forge made from a 40lb propane tank, that roars a 1'' T-Rex burner. It easilly gets hot enough to weld, but i find it harder to keep lower temps. So here are those two blades! The first one out of the forge is some kind of antler that my buddies dog found in Rossland, BC. It has stainless and mokume gane fittings(definitely not made from quarters ;-) ). It has some copper and leather spacers and currently does not have a sheath. The second is red brass, and stacked leather pieces. On these blades I could see what looked like a hamons, but it was hard to photograph. It was just a bright line running exactly where the colours divided on the blade after the quench. Both of these were a lot of first for me, including peening the tangs. The antler handled blade has the pomel hole tapered so the tang would smush into it, but the other one does not. By the way, smush "IS" a technical term. I apologize for the low quality pics...
  14. SAM_6068 by djs1984, on Flickr SAM_6069 by djs1984, on Flickr SAM_6070 by djs1984, on Flickr SAM_6072 by djs1984, on Flickr SAM_6075 by djs1984, on Flickr SAM_6078 by djs1984, on Flickr This Knife is one of our first two narrow tang knives, this is our first attempt at a blind tang. We used 1095, Cocobolo Handle and brass for the guard and 3/16 pin. This knife was clay coated and differentially heat treated. A high polish, and Acid etched to give it a more rust Resistant finish, and bring out the Nice activity in the hamon. ---------------------------------Knife Details----------------------------------- Overall Length: 9 5/16" Blade Length: 4 1/2" Blade Width: @ widest approx. 1" Thickness: 1/8" Handle Length: 4 5/8" Handle Material: Cocobolo, Brass Guard, 3/16 pin Includes sheath pictured. Just nice and clean, simple wrap sheath, black dye, sealed. hand stitched, belt loop fits up to a 2" belt. Asking $385 includes FEDEX shipping with insurance/tracking Questions/Comments always welcome. Thanks for looking!
  • Create New...