Search the Community
Showing results for tags 'utility'.
Found 4 results
Noah M Legel posted a topic in Show and TellA while back, a coworker of mine gave me some truck leaf springs, and I cut a piece to forge into a full-tang clip point EDC. Unfortunately, I overdid correcting a slight warp near the tip and snapped it off, so I rounded off the end and made it more of a utility knife. I feel like I did fairly well forging it close to shape, though, and didn't need much grinding on the blade. Of course, I also like forge finish and hammer marks--it's kind of my aesthetic :P. I also soaked it in vinegar overnight to give it a bit of a patina. The handle scales are red oak that I shaped, inspired by a Scandinavian design, then dyed/distressed in a similar manner to my leatherwork, gave two coats of tung oil, and sealed with a soft wax. Not the prettiest thing, but it works--it already bit me, and I haven't put the final touches on the edge yet.
I've been experimenting a lot with this material recently; someone saw one of the earlier Impregg handles I did and commissioned this guy. The fun part about this material is being able to forge these free-form blades and not have to worry about spending time on fitting scales to the tang. The thumb rest give great control over the edge and is more comfortable than jimping in my opinion. Comments and critique always appreciated Theo
6.5" utility EDC for sale $115
HarrisonIrwin posted a topic in Knives For SaleHere is a small EDC knife for sale. It is made out of 5160 and has been precisely heated treated for this specific metal. It is 6.5" overall with a 3.5 inch blade. The tang is 1/4inch thick at the thickest then goes into a distal taper like all forged knives should! The handle wrap is tan Para cord. The blade was edge quenched (differential HT) properly normalized 3X, hardened in oil and tempered 3X for 2 hours at 370 degrees. for an extra 15 dollars I will make and include a leather sheath. Please let me know if you have any questions. I am asking $115 shipped + optional $15 for sheath. Vets, law enforcement and current military get discount. I prefer paypal but will accept a money order P.S sorry the pictures are so huge, didn't intend for that
Large EDC Tactical
HarrisonIrwin posted a topic in Knives For SaleHi this is a beautiful full tang Tactical/Fighter forged out of Aldo's 52100. It is 1/4" at the thickest and gentle tapers with the distal taper. The blade overall length is 10" with a 6" blade and 4" handle. The wood is an exotic hardwood called bocote that has been hand polished, oiled and sealed. It has two 1/8" brass pins and has epoxied to hold everything together permanently. The blade has been differentially heat treated using Master Smith Ed Fowlers method. It has been 4x normalized, 3x hardened, and finally tempered 3x for 2 hours each time. Between each step it has been placed in the freezer overnight. Ed Fowler states this will add a few extra points of Rc hardness. This knife is extremely sharp and easily shaves hair and whatever else you throw at it! (within reason of course!) I first saw this design when I was learning to forge at Bronk's knife work's a few year ago and finally got around to making it. I made it with extremely hard use in mind. This is a very tough, sharp knife that was made to cut and take abuse. (Although you should never abuse a knife! ) With proper care this knife will last you a life time and more. On the ricasso it has my maker mark of the letter "H". It comes with a handmade sheath. This would be a great knife for a soldier or hunter! Asking price is $200 shipped. PM me if interested though. PayPal preferred but I accept money orders as well. Thank you for looking!