Search the Community
Showing results for tags 'wenge'.
Found 2 results
5160 EDC with Wenge
Noah M Legel posted a topic in Show and TellRecently finished a simple EDC for myself, for once! 5160 blade with a ferric chloride forced patina, Wenge handle scales, and stainless pins. I don't normally grind out my hammer marks or completely get rid of forge scale, because it's my preferred aesthetic, but I figured I might as well play with it.
My 2nd knife. Drop-point hunter, O-1 steel, wenge
Minh-Anh posted a topic in Design and CritiqueThis is my second knife and my first one that doesn't look like a third-grader's art project. I bandsawed the rough profile, drilled the holes, cleaned it up with a Dremel, and made the bevels with a belt sander. After heat treatment (edge quench in hot oil, followed by oven temper), I finished it to 200 grit, attached the handle scales with JB Weld and put the pins in. I then sanded the blade to 800 grit and dropped back to 600 for a satin finish, and sanded the handle to 800 grit. After 5 coats of tung oil, I cleaned the handle and applied a coat of MinWax paste wax. Comments and critiques are welcome! Thanks, Minh-Anh Day