Jump to content

Search the Community

Showing results for tags 'pattern welded'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • General
    • Read before you register
    • Forum News
    • New Board Issues
  • New Work
    • Show and Tell
    • Photography
    • Video and Multimedia
    • Knives For Sale
    • Design and Critique
  • Old Work
    • History
    • Old Masters
    • Library
  • Forge Work
    • Hot Work and Bladesmithing
    • Hot Work
    • Bloomers and Buttons
    • Beginners Place
    • Teacher Directory
  • Forges, Tools, Equipment and Materials
    • Tools and Tool Making
  • Finishing, Tips and Tricks
    • Fit and Finish
    • Sheaths and Leatherwork
    • Carving and Applied Arts
    • Shop Safety
    • Non-Ferrous: fittings, alloys, patinas
  • Heat Treating
    • Metallurgy and other enigmas
    • Heat Treating by Alloy
  • Events
    • Events of Interest
  • Discussion
    • The Way
    • Fiery Beards
    • Books, Videos, and other Media
  • Tailgate Sales
    • Tools, Supplies and Materials
  • Hall of Fame
    • Nominations
    • Show and Tell Hall of Fame
    • WIP/Tutorial Hall of Fame
  • Pinned Topics
    • Pinned Show and Tell
    • Pinned Hot Work Topics
    • Pinned Buttons and Bloomers
    • Pinned Tools and Toolmaking
  • Maker's Mark Registry
    • Maker's Mark Registry
    • Marks to be Identified
  • KITH
    • KITH 2011-2019
    • KITH 2020
    • KITH 2021

Calendars

  • Community Calendar

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

  1. Alright, so the Old Wedge is finally completed, and the pictures are all done! History: I wanted to commemorate the importance of hand tools through out history, and especially those which were made with the expressed purpose of breaking harder materials than themselves. In this case I chose to utilize a approx. 300 year old mountain wedge which has most likely been used for everything from splitting granite to securing personnel and equipment in the now closed Silver Mines of Kongsberg city, Norway. I imagine this old wedge lying in the overwhelming depth and darknes
  2. Just finished the gold inlay on this new blade - belonging to the future knife "Fornkili" - old norse for "Old Wedge". It is forged in a san-mai lamination out of an antique mountain wedge used in the Kongsberg Silver Mines - with a core of folded and twisted sawblade steel and 15n20. Proceeding with work on the handle. Very excited... Sincerely, Alveprins.
  3. Hi everyone - thought I'd share the latest one... I give you Sǫg Tǫnn (Saw Tooth) - forged in honor of the innumerable abandoned wood mills scattered around the country, left to rot as their purpose has been served long ago. How many a farm has been made possible due to the many-toothed high carbon blades - spinning tirelessly day and night, through summer and winter? How many noble trees has met their end at the sawblade's edge in order to fulfill an even higher purpose of keeping man and livestock dry and warm? Hail to you, old saw-mills covered in moss, wi
  4. Alright, so December 2019 I forged a fork for my wife (link HERE) and in 2020 I was suppose to get her a matching knife.. Now, time ran away from me - and I weren't able to finish it until now- but now I have! The steel is 15n20 and.. something - I don't remember... I decided to practice some more inlay, doing some 0,5mm and 1,0mm wire inlay into the "bolster" and heart. Made some use of my new Lindsay Bench Jewel Rotary Tool along with my newly acquired super small FG 1/4 dentist burs. (undercutting 0,5mm grooves i
  5. Alright, so I got tired of working with leather, and got tired of forging my new blade... so.. arrow-head! Figured I might need to forge some of these in the future if the apocalypse proves to be imminent... Just for fun. Chiao!
  6. Alright, so I've finally finished the latest knife... I've named it Járn Haukr - Iron Hawk - with it's handle shaped like that of the body of a bird - with a nice fat chest for good grip. The blade is in bog iron from old tools made by the workers in the Silver Mines of Kongsberg city in Norway. This makes out the body. The edge steel itself is folded and twisted saw-blade steel from an old wood mill and 15n20 for contrast. The edge steel hardened nicely, and ended up at 58 HRC. The handle is in a solid piece of stabilized maple, with brass and vulcanized fiber spacers with a
  7. I present to you - the latest Deer-Hunter - Yggdrasil laufsblað - Leaf of Yggdrasil! Blade in 3 bars folded and twisted steel. 100 layers of folded railroad steel for the body, and 60 layers of ferrier's rasps and 15n20. Handle in Chestnut with core of Holly, w. spacers in vulcanized fiber. Front part of handle is Mammoth Ivory, with spacers of vulcanized fiber and brass. The Holly is engraved with Elder Futhark runes in Old Norse. The poem is taken from Grímnismál verse. 33 - Codex Regius and pertains to four deer that eat from the leaves of Yggdrasil - the world tree. Th
  8. Alright, so from the same billet as my last knife - here is another one. Blade in folded and twisted railroad steel, in a san-mai lamination with Øberg-steel for the core. Handle in stabilized Maple, with spacers in brass and vulcanized fiber - with copper for the front. All feedback and critisism is, as always - most welcome. Chiao!
  9. Hi guys... Been a while since my last post, so I thought I'd seize the oportunity now that I've finally gotten something new in the works. Finished the knife today, and will start working on the sheath tomorrow. I call it "The Moose Hunter". Made to order for a.. you guessed it - Moose Hunter. ;) Blade in railroad steel and tool steel / ferrier rasps for the edge. Handle in Maple burl, Holly, Mammoth ivory, Moose antler, brass and vulcanized fiber. Any and all criticism is.. as always - very much welcome. :) Sincerely, Alveprins.
  10. Hi All! Haven't been here for some time... I've been learning, and improving skills Here there is a scramasax forged out of 5 bars: 3 x twisted rods (45/68/45 layers) + spine and cutting edge of 80CrV2. The handle is made with bronze spacers, deer antler, pear wood and black leather spacer. The "eye" on the butt is brass riveted and soldered from beneath. Overall len.: 515mm/20,27" Blade len.: 323mm/12,71" Handle len.: 184mm/7,24" Width: at handle: 33,5mm/1,32", at widst point: 35mm/1,38" Thickness: 5,5mm/0,22" Weight: 483g/17oz Let's save the word
  11. Alright folks! Finished this little thing before the vacation, but never got around to taking photos of it... So here they are! So, first of all - the stats: Blade length: 16 cm Blade width: 3,4 cm Blade thickness: 3mm Handle length: 11,8 cm Total weight: 110 grams Blade is made in a san-mai lamination with railroad steel for the body and spring steel for the edge. Handle is made in a laminate of stabilized Maple, Teak, buffalo horn, brass and vulcanized fiber. Alright, that's it! Chiao people, and have a nice week.
  12. Mixed species ladder patterned steel.
  13. Hello. I'm pleased to offer for sale a beautiful and fully useful pattern welded seax. The materials are: edge and spine: 80CrV2 tool steel, core: approx 15 layers twist (80CrV2 x mild steel) Handle: Bog oak, curved deer antler, Hungarian plum wood + leather sacers and silver pin. Dimentions: Ov. len. 290mm (11,8") Blade leng. 140mm (5,7") Thick 3,6mm (0,14") Wide at handle 23mm (0,94") At widest point 27mm (1,1") 135$ shipped Contact via PM or: krylip (at) gmail.com
  14. Here is a custom Chef's Knife I just finished up for a customer. The 22,5cm blade is forged in an exotic jet-turbine alloy mixed with high carbon steel, folded to 44 layers, twisted and laminated in a san-mai lamination with Øberg-steel for the core. The handle is in stabilized Zebra wood, Jamaican blue mahoe, buffalo horn and vulcanized fiber. weight: 214 grams Blade length: 22,5 cm Blade width: 3,5 cm Blade thickness: 4 mm Blade hardness: 63 HRC Handle length: 12,5 cm Handle thickness: 1,7cm Any and all critique is as always most w
  15. Alright - so this whole thing started in the Metallurgy section of the forum where I test some highly exotic steel from a Jet Turbine Engine shaft... That thread can be found HERE. As for the continuation of this little project - keep an eye on this thread right here. Alright, so I've tested some steel - and it seemingly has some incredible properties. It hardens to above 60 HRC when quenched in oil - but it stays maleable and not brittle - even at that hardness level. I had to use serious repeated force to break one in half. Here are some closeup images of the turbine shaft ste
  16. I managed to destroy a piece of steel while twisting (bad weld) and got pissed to such an extent I decided to put that project on a temporary hold and make a chef's knife out of the scraps. Here is the result. The pattern welded steel is 15 layers of twisted railroad and railroad-plates steel, and the edge steel is Øberg-steel. Hardness at edge: 58HRC Handle materials are: What kind of wood is that burl..? Anyone? + Holly, vulcanized fiber, silver tinn, and buffalo horn. NOTE: If you look towards the edge - notice a crack in the edge steel. It does not continue
  17. Here's a little thing I restored actually - recently. The blade was made quite a few years ago - but had been collecting dust'n rust. So - I shined it up and made a brand new handle and sheath for it. The runes on the blade reads "Smar Haukr" - old Norse for Little Hawk. Steel: Don't remember. Hardness at edge: 58 HRC (differential hardened) Handle: Russian Bog Oak (2800 years old) + maple, green vulcanized fiber and 925 silver. This will be my daily beater in the mountains and forests whenever I travel. Sincerely, Alveprins.
  18. Finally finished the leather sheath for this knife I made a while back. Original post HERE. A bit late - but finally managed to put it up for sale. I must say though - working with leather is definitively not my favorite... Sincerely, Alveprins.
  19. Recently I finished a comission knife. Pattern welded balde: one twist approx. 15 layers. Spine of reinforcing steel, cutting edge of 80CrV2 Handle: Brass, elk antler, elm wood + leather spacers and silver pins. The object both for usage and nice looking
  20. Thought I'd share this for the heck of it... I promised to make a little blade for my sisters master farrier - so I used a piece of my old botched-up Bowie and made actually two blades out of it. I made them san-mai lamination just to add some more steel into the mix - if not I would have less material. The blade consists of two bars.. or I suppose 4 - since its a san-mai blade now - 15 layer 15 and 15n20 steel, twisted, and laminated with a socalled Øberg-steel in the middle. Øberg is a swedish steel manufacturer I believe... I haven't really read into it.. Its the highest ca
  21. Skogr Brandr - The Forestblade Blade length: 23 cm Blade width: 3,2cm Handle Length: 12,5cm Total weight: 305 grams The steel is 120 layers of twisted UHB20C, UHB15LM, 15N20, old rasps and Øberg-steel. Differential hardened. Hamon disappears towards the middle of the blade though. I suspect the clay came off quickly during quench. Handle is colored and stabilized buckeye burl fastened with a mosaic pin. Sheath is stained and waxed leather. Stitched using saddle-maker technique. Enjoy. hope you guys liked it.
  22. Update: SOLD Recently finished up this little Seax. The blade is made from a W1 edge, a 1095 and 15n20 twisted bar for the center, and 150 year old wrougt iron window par for the spine. The wrought iron is fairly corse and shows a distinct pattern. The blade is approximately 4", the handle 4.125" A sheath is not included, but I can make one upon request. Price is SOLD plus shipping. If you're interested, send me a PM or go to the etsy page here: https://www.etsy.com/listing/498881227/pattern-welded-broken-back-seax-knife?ref=shop_home_active_1 Thanks for looking
  23. Ok - so I sold my Saami inspired knife "Hausakljufr" - the Skull Cleaver - and an unfortunate potential buyer was so frustrated about not getting to bid on it - he decided to order a custom job. I suggested to make a Long Seax instead of a copy of Hausakljufr, since that type of knife is something I've been wanting to make for a long time. Excited as he was about vikings - he agreed. I've had full control over the design. And this one I am particularly proud of. I present to you all: Hraustligr - The Dauntless! I've scrapped my previous project found HERE - and re-purposed the steel
  24. Update: SOLD This is a piece built around undulation, from the waves of the twin serpents in the blade steel and sheath, to the bursting stars of the twists and the wavy grain of the maple in the handle. The blade is made with a W1 edge, 1095/15n20 pattern welding, and mild steel in parts of the serpent. The handle is made from curly maple stained to bring out the figure and the sheath is leather with hand textured brass fittings. The front side of the sheath has a serpent tooled onto it to match the steel of the blade. I should mention that on the rear side of the sheath, there is a s
  25. Let me introduce hvassþorn - the Sharp Thorn. This will be a 13cm long 3cm broad blade, and 13cm long handled thorn-themed kitchen-knife in a slim protective sheath made from antique brown stained leather. The steel with be UHB20C UHB15LM and 15N20 mixed with tool steel (old rasps) folded to about 200 layers then twisted tightly. The handle will be 2800 year old Russian bog-oak fastened with mosaic pins. I expect to get physically started on this between Winter Solstice and New-Year.
×
×
  • Create New...