Search the Community
Showing results for tags 'vertical'.
Found 2 results
Finished Vertical Forge !
Jake Reese posted a topic in Show and TellHi just wanted to post my completed vertical forge. Love it except I would like to convert to blown air burner (need blower). Only thing I do not like is the way I sealed off top of forge chamber. I coated a piece of Inswool with Satanite and laid on top (it's under that metal lid). Now it's stuck on there and have no way of getting into the forge chamber for maintenance, dropped parts, etc. My fix for this is maybe a 1 sq ft piece of Duraboard cut into a circle to "plug" the forge chamber. OR since I plan to buy some Kast-o-Lite 30 soon, I may just make a casted circle mold to block the top of chamber. Duraboard is pricey so I'm leaning toward the later option. Anyway just wanted to post a pic. Feedback and/or tips are welcome. Thanks everyone!
Help with a sword forge/heat treat oven?
Ryan Smith posted a topic in Tools and Tool MakingHi, I'm looking to build a 72 inch vertical forge with minimal volume. Does anyone have any advice on design? My basic plan is to use a steel pipe (8 inch diameter) lined with 2 inches of Kaowool. This will provide a 4 inch diameter mouth that runs the length of the pipe, which will give me enough room to hang longer pieces for a heat treat soak. I'm not looking for forging heat, but definitely need to get thicker steel to critical temperature for heat treat. I'm thinking about using a 3-burner system, evenly spaced along the length of the pipe to try to keep my heat even but I'm concerned that I'll end up with nasty hot spots around the burners. Is there a way to even out the heat better? Is 2 inches of Kaowool enough to provide efficient operation? Any and all advice is welcome! Thanks!