smird Posted February 9, 2009 Share Posted February 9, 2009 Cleaned up the shop a bit this weekend, thought I'd offer up some stuff I no longer need. I'd be happy with a trade, cash or ???. I could really use 1070-1080 and L6 for damascus or of course tools. I can ship or local pickup(Riverside CA) would be fine. Could also meet up somewhere in Southern California. I'll also be going to the So Cal. knives show so I could deliver there. Brad Stilley brad@riversideforge.com 1.5 HP motors both variable speed and C-Faced off off Burking 960s. They were replaced with 3HP 3-Phase with VFD Baldor $175.00 OBO Leason $150.00 OBO O1 Steel 2 pieces both are 3"x3" one 21.5" approx and the other 16.5"approx a little surface rust Probably not the place but of well 2004 Yamaha Kodiak Quad (not currently registered) not sure how much if your interested talk to me i'm sure we can work something out. Thanks Contact info above Link to comment Share on other sites More sharing options...
cwilliams Posted February 9, 2009 Share Posted February 9, 2009 Ill take the Leeson if you dont mind shipping it. Chris Chris Williams Link to comment Share on other sites More sharing options...
Sam Salvati Posted February 9, 2009 Share Posted February 9, 2009 I will take the baldor also if you don't mind shipping. Or I will take the leeson if Chris doesn't want it for some reason Let not the swords of good and free men be reforged into plowshares, but may they rest in a place of honor; ready, well oiled and God willing unused. For if the price of peace becomes licking the boots of tyrants, then "To Arms!" I say, and may the fortunes of war smile upon patriots Link to comment Share on other sites More sharing options...
smird Posted February 9, 2009 Author Share Posted February 9, 2009 Ok looks like the Motors are sold. Chris, Sam i'll try to get a shipping quote today or tomorrow and we can wrap up the deal. I assume Fedex or UPS ground is fine I'll ship it through my work we get fairly good rates. Unless you guys want to set something up, let me know. Thanks Brad brad@riversideforge.com Link to comment Share on other sites More sharing options...
cwilliams Posted February 9, 2009 Share Posted February 9, 2009 (edited) Brad No I am not picky, either Fedex or UPS ground is good for me. Chris PS Edited to add if it helps you can get rid of the metal holding up the speed control. Edited February 9, 2009 by cwilliams Chris Williams Link to comment Share on other sites More sharing options...
robert washburn Posted February 9, 2009 Share Posted February 9, 2009 BradNo I am not picky, either Fedex or UPS ground is good for me. Chris PS Edited to add if it helps you can get rid of the metal holding up the speed control. What do you want for the 4 wheeler. Thanks Robert Link to comment Share on other sites More sharing options...
smird Posted February 9, 2009 Author Share Posted February 9, 2009 I'll see if removing it makes any difference. I can take it off and lay it next the motor so at least the package size won't be so big. Brad BradNo I am not picky, either Fedex or UPS ground is good for me. Chris PS Edited to add if it helps you can get rid of the metal holding up the speed control. Link to comment Share on other sites More sharing options...
smird Posted February 9, 2009 Author Share Posted February 9, 2009 That's a tough one. I was hopping to get $2000-$2500.00 for it. Or trade for some knifemaking or casting equipment in that range. Brad What do you want for the 4 wheeler. Thanks Robert Link to comment Share on other sites More sharing options...
smird Posted February 10, 2009 Author Share Posted February 10, 2009 It was brought to my attention I have no price on the o1. I've got quotes for about $250-350.00 for new of course. So I was thinking $85.00 for the little one and $120.00 for the bigger. The weights are 42 and 53 pounds approx. These has been sitting in the shop for about 10 years so make me an offer. I'm willing to trade for supplies; borax, materials for damascus, wrought iron or anything else I can use. Like I said I can deliver to the So Cal knives show. Or meet up somewhere in southern California. PMs with shipping quotes have been sent to Sam and Chris. Brad Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now