Aldo Posted February 5, 2011 Share Posted February 5, 2011 (edited) Because of the great interest in thinner W-2 sizing I called Niagara Specialty Metals and they are willing to roll our existing W2 stock out to 3/16", 5/32", 1/8" and 3/32". I will be bringing 2,000 pounds up to the mill next week if weather permits. There should be approximately 500 pounds per size. If you are interested, please contact us. The material should be ready by the end of March. You've been warned, Aldo Bruno __________________ Aldo Bruno NJ Steel Baron njsteelbaron@gmail.com NJ Steel Baron Office Phone # 862-203-8160 Edited February 5, 2011 by Aldo Link to comment Share on other sites More sharing options...
JJ Simon Posted February 5, 2011 Share Posted February 5, 2011 I'll snag some at the Fire and Brimstone event. If its done by then. Thanks, JJ Link to comment Share on other sites More sharing options...
Dick Sexstone Posted February 6, 2011 Share Posted February 6, 2011 Cool Aldo, THAT will save many of us a lot of work... THANKS Dick Link to comment Share on other sites More sharing options...
Christopher Price Posted February 7, 2011 Share Posted February 7, 2011 I'll snag some at the Fire and Brimstone event. If its done by then. Thanks, JJ This would be ideal for me, to save on some shipping, if the mill can get a batch ready in time. I'm less concerned about final thickness, as long as it's not round. 1/8" or thicker is my preference. The Tidewater Forge Christopher Price, Bladesmith Link to comment Share on other sites More sharing options...
Steve Sells Posted February 10, 2011 Share Posted February 10, 2011 1/8 or 3/16 would be great Aldo. 1 to 1.5 wide nice too??? Steve Sells http://fenrisforge.com Link to comment Share on other sites More sharing options...
hardingknives Posted February 10, 2011 Share Posted February 10, 2011 Hey Aldo! I emailed my steel order awhile back, but was wondering if you can get cru forge V? I would like to buy soley through you from now on. Link to comment Share on other sites More sharing options...
Aldo Posted February 12, 2011 Author Share Posted February 12, 2011 If you are looking for CruForge V please contact me at the office. Getting it is not a problem. Link to comment Share on other sites More sharing options...
Chris Moss Posted September 14, 2011 Share Posted September 14, 2011 what is the status of this? -Knifemaker- http://knifemaker87.googlepages.com/home Hamons are a painting; blades are a canvas, clay is my paint, fire is my brush. the problem is.. i am still painting like Pablo Picasso. Link to comment Share on other sites More sharing options...
JMJones Posted September 15, 2011 Share Posted September 15, 2011 in stock on his website as of today. www.jmjonesknives.com Link to comment Share on other sites More sharing options...
Aldo Posted September 15, 2011 Author Share Posted September 15, 2011 You tell them Mr Jones!!.....Thanks Link to comment Share on other sites More sharing options...
Bill Hoffman Posted September 15, 2011 Share Posted September 15, 2011 Hey Aldo, Will you have some of this with you at Ashokan? Bill Link to comment Share on other sites More sharing options...
Aldo Posted September 15, 2011 Author Share Posted September 15, 2011 Still making those Cleavers Bill? Link to comment Share on other sites More sharing options...
Bill Hoffman Posted September 16, 2011 Share Posted September 16, 2011 You becha! Link to comment Share on other sites More sharing options...
jo_smith Posted November 9, 2012 Share Posted November 9, 2012 Are theses sizes still available? I have some of the thicker w-2 and it is great. www.SilverAnvilBlades.com Link to comment Share on other sites More sharing options...
Steven Gillespie Posted November 10, 2012 Share Posted November 10, 2012 Are theses sizes still available? I have some of the thicker w-2 and it is great. Check the site, last time I visited pricing some more steel I only remember 1/4" bring the smallest size. Link to comment Share on other sites More sharing options...
Aldo Posted November 10, 2012 Author Share Posted November 10, 2012 Jo and everyone else interested, We have W-2 ordered in 1/4" 3/16" and 1/8". It will be showing up In the beginning of March. Aldo Bruno Link to comment Share on other sites More sharing options...
jo_smith Posted April 21, 2013 Share Posted April 21, 2013 I was wondering if the steel has shown up yet? Still very interested in ordering. Thank uou www.SilverAnvilBlades.com Link to comment Share on other sites More sharing options...
B. Norris Posted April 23, 2013 Share Posted April 23, 2013 It is on the website. Have you looked? W-2 NJ Steel Baron ~Bruce~ “All work is empty save when there is love, for work is love made visible.” Kahlil Gibran "It is easier to fight for one's principles than to live up to them." - Alfred Adler Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now