Looking for 2 by 72 or 2 by 20 belt grinder plans.

[Hayden 0]

I'm a young maker looking to build a belt grinder to gain experience in meticulous details. I have access to a small machine shop for free and a multi-million dollar machine shop for an arm and a leg cost. I can find almost anything for cheap our in trade for work in my town, but I just couldn't find a belt grinder. Anyone have any plans they'de email me? Thanks

[Ken Kelley 0]

I'm a young maker looking to build a belt grinder to gain experience in meticulous details. I have access to a small machine shop for free and a multi-million dollar machine shop for an arm and a leg cost. I can find almost anything for cheap our in trade for work in my town, but I just couldn't find a belt grinder. Anyone have any plans they'de email me? Thanks

 

 

Here's the plans I used to build mine http://www.dfoggknives.com/PDF/GrinderPlans.pdf

 

Check the Tools and Toolmaking section under the stickies and look for Grinder Build.

 

Here's a thread with pictures of my project http://www.bladesmithsforum.com/index.php?showtopic=7564

Edited March 7, 2011 by Ken Kelley

[deker 34]

Take a look in the sticky above. My grinder build wasn't pretty, but sometime later on somebody posted some actual plans.

 

-d

[Bill Hoffman 6]

http://gonza-rytec.rajce.idnes.cz/brusky/

 

This site should keep you busy for at least a couple of minutes.

 

Bill

[cwilliams 0]

http://blindhogg.com/eerfgrinder.html

[loneronin 1]

look this long (22 min) and detailed video!

http://www.viddler.com/explore/rashid11/videos/1/

Edited March 26, 2011 by loneronin

[BenR.T. 12]

http://blindhogg.com/eerfgrinder.html

This is really simple bolt together design, If you can find somewhere to cut it out for you, It goes together pretty easy (even easier with a welder!)

You can also buy it pre-cut in a kit Here.