Jump to content

Walnut Bowie/Hunter with Hamon


Recommended Posts

Here's one hot off the press. My first integral guard, first hamon, and first tapered tang. The blade has been polished to 600 grit, then lightly buffed on a cotton wheel. Scales are also taken to 600 grit with a tung oil finish.

 

Specs:

OAL: 9 1/4"

Blade length: 4 1/2"

Handle length: 4 1/2"

-1/4" 1084FG, Flat ground with a hamon

-Highly figured American Walnut scales

-3/16" Stainless pin

-Tapered tang

 

Thanks for looking!

 

Brandon

 

 

 

walnutbowie382.jpg

 

walnutbowie375.jpg

 

walnutbowie374.jpg

 

walnutbowie372.jpg

 

walnutbowie370.jpg

"A country boy can survive" - Hank Williams Jr.

Link to post
Share on other sites

I like this one. that is really good for a first hamon. Careful, they can be as addictive as bladesmithing in general. You will find yourself thinking for hours about whether to use mother's versus flitz or pumice versus aluminum oxide or parks-into-water versus just water or just parks 50. It is a downward spiral.

 

well done.

kc

please visit my website http://www.professorsforge.com/

 

“Years ago I recognized my kinship with all living things, and I made up my mind that I was not one bit better than the meanest on the earth. I said then and I say now, that while there is a lower class, I am in it; while there is a criminal element, I am of it; while there is a soul in prison, I am not free.” E. V. Debs

Link to post
Share on other sites

Nice job Kid !! B)

If ya can't be good don't git caught  !!                                        People who say stuff can't be done need to

                                                                                                        git the hell outta the way of people who do stuff   !!!

Show me a man who is called an expert by his peers         

And I will show you a good man to listen to ......

Show me a man who calls himself an expert

and I will show you an egotistical asshole...............!!

 

                             

Link to post
Share on other sites

Looks great! I see Serge's influence in that guard.

 

Well done.

 

--Dave

-----------------------------------------------

"It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood, who strives valiantly; who errs and comes short again and again; because there is not effort without error and shortcomings; but who does actually strive to do the deed; who knows the great enthusiasm, the great devotion, who spends himself in a worthy cause, who at the best knows in the end the triumph of high achievement and who at the worst, if he fails, at least he fails while daring greatly." -- Theodore Roosevelt

http://stephensforge.com

Link to post
Share on other sites

Gorgeous work, I liek the little guard.

Let not the swords of good and free men be reforged into plowshares, but may they rest in a place of honor; ready, well oiled and God willing unused. For if the price of peace becomes licking the boots of tyrants, then "To Arms!" I say, and may the fortunes of war smile upon patriots

Link to post
Share on other sites

Kevin- Thanks. I had to resist the urge to re-clay it for the third time in a row after I kept contemplating how to get some good action in the hamon. Addictive indeed. But it's just another one to add to the pile.

 

Dave- Thank you, Dave. I am a big fan of Serge's style. I consider your words to be a great compliment.

 

Sam- Thanks. I was digging that integral sword you did recently.

 

I thank everyone else also. I really appreciate the kind words.

 

Brandon

"A country boy can survive" - Hank Williams Jr.

Link to post
Share on other sites

Nice knife Brandon - i like the grain and clean shaping of the handle.

 

or parks-into-water versus just water or just parks 50.

 

 

 

 

Kevin, i'm trying and failing to come up with a reason you'd ever go parks into water - did you mean water into parks?

Jake Cleland - Skye Knives

www.knifemaker.co.uk

"We can't solve problems by using the same kind of thinking we used when we created them."

"Everything should be made as simple as possible, but not simpler."

"Two things are infinite: the universe and human stupidity; and I'm not sure about the the universe."

 

Albert Einstein

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...