Jokke Posted March 10, 2013 Share Posted March 10, 2013 after taking my time to finish those two, I just sewed two small sheets for them data: wild damascus, about 120 layers of 2/3 1.2842(90MnCrV8) and 1/3 1.2767(X45NiCrMo4) made at the Bremeker Hammer (http://www.bremecker-hammer.de/) the broader one is one side flat grounded with an 28mm edge, 146mm long just before hardening and without the etch the smaller one has a blade of 26mm and is sharpened on both sides, both are cutting like a razor, 145mm long the flat side: one in brown the other one in black leather Jokke Link to comment Share on other sites More sharing options...
Jokke Posted March 10, 2013 Author Share Posted March 10, 2013 they are perfect to cut leather, I used them for the sheets and very accurate in cutting wood I hardened them to 56 HRC, which makes it easy enough to resharpen on a wetstone Jokke Link to comment Share on other sites More sharing options...
GEzell Posted March 14, 2013 Share Posted March 14, 2013 I like how everything is rounded except the edge... lovely work. George Ezell, bladesmith" How much useful knowledge is lost by the scattered forms in which it is ushered to the world! How many solitary students spend half their lives in making discoveries which had been perfected a century before their time, for want of a condensed exhibition of what is known."Buffonview some of my work RelicForge on facebook Link to comment Share on other sites More sharing options...
Hoy's Forge Posted March 22, 2013 Share Posted March 22, 2013 never saw anything like this, very slick! www.hoyfamily.net Isa 54:16 Behold, I have created the smith that bloweth the coals in the fire, and that bringeth forth an instrument for his work; and I have created the waster to destroy.Lu 22:36 Then said he unto them, But now, he that hath a purse, let him take it, and likewise his scrip: and he that hath no sword, let him sell his garment, and buy one. Mr 8:36 For what shall it profit a man, if he shall gain the whole world, and lose his own soul? Link to comment Share on other sites More sharing options...
Jokke Posted March 22, 2013 Author Share Posted March 22, 2013 thx to both of you! Jokke Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now