Jump to content
Matt Stagmer

A few seax's in the works

Recommended Posts

Hey guys and gals,

 

Its been far too long since I have posted anything. It's been a crazy year in the shop and out of it. I wanted to share a few seax knives that I have been working on finishing up.

 

Sam forged the two wing nuts and kerry did the initial forging on the blade that has the bronze hande fittings. The rest was done by me. The carved handle was the first handle I ever carved about 5 years ago. I had it waiting for the right blade all this time.

 

 

The top seax is 4130 with an edge quench and does show some activity in the right light. The fittings are steel and the handle is coco. I did some chiseling on the spine and ground a fuller. The wingnut is pure iron(forged by Sam Salvati).

 

The next one is pattern welded from three bars of straight laminate. 15N20 and 1070 for the top two and I have no idea what the edge was. Kerry forged the blade blank and I took it from there. The handle is elk with cast bronze rings. The pommel bar and hilt bar are wrought and the wingnut is pure iron(forged by Sam Salvati).

 

The next one is four bars. Spine is wrought then two bars of loose twist 15N20 and 1070 then wrought and then a W2 edge. Wrought fittings and a carved hickory handle.

 

The fourth one was a bit of a trial for me. I was playing with different ways to do the welding. The blade is w2 and wrought with an antler handle and poured pewter bolster.

 

 

1383328_722556707758958_1673787905_n.jpg

 

Since this picture was taken all of these have been engraved and completed. All in all these 4 represent some good learning. Nothing to flashy. Just trying some new things. I dont get much time these days to break from the production so I have speant all of my weekends forging and trying some things that have been on my mind for awhile.

 

Here is a better picture of #1

993998_10202110326939125_1275166090_n.jp

 

Here is a better picture of #2

1377294_726273180720644_1252465919_n.jpg

 

Here is a few shots of #3

1392055_10202143071917729_47377265_n.jpg

1380735_10202143072157735_1331276336_n.j

 

1376405_10202143072477743_229250621_n.jp

1391772_10202143072877753_170186638_n.jp

 

And here is a better of the last one.

1148909_10201843054857490_706161035_n.jp

 

And a few in process shots...

1175123_10201856070582875_205008582_n.jp

as you can see it fought me a little bit but I got it all solid under the screw press!

1174544_10201856070142864_1835826953_n.j

1186988_10201862733309439_1064065898_n.j

 

 

549013_10201812914544001_1825182418_n.jp

1236774_10201812914864009_1237012497_n.j

1175387_10201812913263969_162309089_n.jp

 

and last but not least my little helper that seems to show up every time I fire up the forge.

536741_10201802974615509_1860600516_n.jp

 

 

Thanks for looking. Feel free to launch questions. I know I did some things in odd ways on some of these but I learned a ton and continue to do so.

 

Cheers,

Edited by Matt Stagmer

Share this post


Link to post
Share on other sites

great looking stuff Matt,

I was back in Md last month wasnt in the baltimore area long enuff to pester you guys...................................

I did get to the renn faire tho

and like I posted in My seax post , this place is full of seax fiends!!!(and the puns flew!!!)

you gonna sheath them puppies of just have unprotected seax???(yes I went thire yet again)

Share this post


Link to post
Share on other sites

Good classic blade shapes... the guards and fittings bug me a bit though, they take away from the authenticity, IMO.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...