Jump to content

My 2nd knife. Drop-point hunter, O-1 steel, wenge


Recommended Posts

This is my second knife and my first one that doesn't look like a third-grader's art project. I bandsawed the rough profile, drilled the holes, cleaned it up with a Dremel, and made the bevels with a belt sander. After heat treatment (edge quench in hot oil, followed by oven temper), I finished it to 200 grit, attached the handle scales with JB Weld and put the pins in. I then sanded the blade to 800 grit and dropped back to 600 for a satin finish, and sanded the handle to 800 grit. After 5 coats of tung oil, I cleaned the handle and applied a coat of MinWax paste wax.

IMG_0916.JPG

Comments and critiques are welcome!

 

Thanks,

 

Minh-Anh Day

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...