Jump to content
Sign in to follow this  
Philip Patton

Started an Aristotle today

Recommended Posts

Today I started building an Aristotle Furnace. It got too dark to finish it tonight because I started out late, but hopefuly I will be able to get it done tomorrow. I do have a question. How thick should the sacrificial layer of clay, charcoal be on the inside? Also, if you have any tips please let me know.

Here are some photos:

First I gathered some local clay.
10672440_10203443005170541_7906552089209

And I mixed it 50/50 with fresh horse manure.
10620828_10203443004610527_2567881259647

Hands got a work out.
10671427_10203443006410572_5766410783602

10460316_10203443004170516_2217281694114


I started the build on top of a 3/4" Viking shield blank with three layers
of the mix, with a thin layer of pure clay in-between them.
10405285_10203443006010562_7649156575602

10628434_10203443006770581_7718782418815


While I was at it, I filled in the empty spaces in the botom of my forge with clay, and hooked up the blower. Now it is ready to go! I just need to make up some charcoal.
10649585_10203443003570501_5946553155180

Share this post


Link to post
Share on other sites

It looks like you live in an area that has plenty of natural resources. For the sacrificial lining are you talking about one for the bottom of the furnace? If so 2" should be enough. Every run I had with one of these furnaces the puck of steel never settled completely on the liner. Also, as soon as you are able to its good to build the air chamber on the side before the main chamber is completely dry to get better cohesion of the two. That is a cool looking forge by the way!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...