Craig Hashimoto Posted March 20, 2015 Share Posted March 20, 2015 (edited) Aloha All, I am offering some of my stash of very special W2 purchased from Don Hanson way back in 2008. (I have asked his permission on this thread and to use his name... Thank-you Don... you're also a very special guy! ) I have available the following (note I used my postal scale for those under 10lbs and my bathroom scale for the others ... so weights are approximate... best I had so I'm going with it ) I am offering this to members here first at $4 a pound per bar shipped to the USA. Minimum 2 bars please... 6 1 1/4" Square bars that are 11" long and weigh @ 5.25 lbs - $21 each bar shipped to the USA - GONE 6 1 3/4" Round bars that are 11" long and weigh @ 7.5 lbs - $30 each bar shipped to the USA - GONE 16 2" Round bars that are 11" long and weigh @ 10lbs - $40 each bar shipped to the USA - GONE pending funds 8 2 1/18" Round bars that are 11" long and weigh @ 11lbs - $44 each bar shipped to the USA - GONE 19 2 1/18" Round bars that are 10" long and weigh @ 9 lbs - $36 each bar shipped to the USA - Gone pending funds The maximum weight I will ship at a time in each flat rate box is 44 lbs... I know I can go up to 70 lbs but the old folks at my post office really like me and I'd like to keep it that way I am also offering some Nickel 200 sheet... These .065 thick on my calipers 4 1/2 wide by 11" long.... there are 20 pieces.... this is @18 lbs on my bathroom scale.... $GONE pending funds... shipped to the USA I also have some 15n20 at .065 thickness by 1 1/2" wide and 6" long... 122 pieces wrapped... 61 feet total... Did a little research and found it's about $150-$170 before shipping.... $GONE shipped to the USA I added "and others" to the title in case I wanted to offer other items I come across in the shop and storage... Thanks all for looking.... Have a great week! Take Care and God Bless, Craig Edited March 25, 2015 by Craig Hashimoto Link to comment Share on other sites More sharing options...
JM Wands Posted March 20, 2015 Share Posted March 20, 2015 (edited) Heya Craig, wish you weren't doing this, but the wheel just keeps on turning. I hope you work it all out. I'll take the square W2 bars. thanks, best, jm Edited March 20, 2015 by JM Wands BladeThe blade, elegantSlicing through the sweet, warm breezewith a precise hit.Sam Wands (10 years old)Gold for the merchant, silver for the maid;Copper for the craftsman, cunning at their trade.Good! Laughed the baron, sitting in his hall;But steel---cold steel---shall be master of them all! Link to comment Share on other sites More sharing options...
Don Hanson Posted March 20, 2015 Share Posted March 20, 2015 Craig, that W2 looks as good as when I shipped it to you. I was going to take the 1.25" square, but JM was quicker. I will take the 15N20. PM me your paypal addy. Thanks my friend. Don Hanson lll My Webpage Link to comment Share on other sites More sharing options...
Chris Roberts Posted March 20, 2015 Share Posted March 20, 2015 Craig I will take 4 of the 2" rods PM if needed otherwise I'll use the same PP as the Koa and my shipping stuff will be the same. I'll follow up with a PM as well. Chris Link to comment Share on other sites More sharing options...
JMJones Posted March 21, 2015 Share Posted March 21, 2015 I will take 40 lbs. Diameter does not matter. www.jmjonesknives.com Link to comment Share on other sites More sharing options...
JM Wands Posted March 22, 2015 Share Posted March 22, 2015 $$ sent, Thanks Craig, good luck,,, jm BladeThe blade, elegantSlicing through the sweet, warm breezewith a precise hit.Sam Wands (10 years old)Gold for the merchant, silver for the maid;Copper for the craftsman, cunning at their trade.Good! Laughed the baron, sitting in his hall;But steel---cold steel---shall be master of them all! Link to comment Share on other sites More sharing options...
Brian C Madigan Posted March 25, 2015 Share Posted March 25, 2015 I still have some big rounds and squares from Don's W2 drop, and some drawn out to working thickness. Has it been since 2008? My stockpile hasn't quite dwindled as much as I thought it would. It's great stuff, saw off a puck and hammer it out! Link to comment Share on other sites More sharing options...
Don Hanson Posted March 26, 2015 Share Posted March 26, 2015 I still have some big rounds and squares from Don's W2 drop, and some drawn out to working thickness. Has it been since 2008? My stockpile hasn't quite dwindled as much as I thought it would. It's great stuff, saw off a puck and hammer it out! No, I believe I stopped selling it around 2010-11. Don Hanson lll My Webpage Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now