Isaac Myers Posted May 9, 2015 Share Posted May 9, 2015 (edited) Hi all, below are a few of the projects I've been dorking around with, the past couple weeks. The first from the left, is a wrought-iron pattern-welded seax, with a 1095 edge. I intentionally over-etched it, to really define the layers, unfortunately, it had some really heavy pitting in a few spots, that maim the aesthetics. The second-over is a file-knife that I've been procrastinating; It's effectively a test piece for a later project--it'll have "dagger-ized" Petersen L hilt, when finished--it needs a bit more draw-filing before HT. Next is my KITH Puukko, and a test knife (trying out Aldo's steel); experimenting with how it works. Last one is another fiddley knife; just playing with negative space, etching, and handle-work. A bit more of the seax My KITH puukko is a 4 bar composite--a layer of wrought, two opposing 1095/"refined" wrought twists, and an edge of 1085. The inside twists were my first attempt at Damascus; really interesting to work with. I haven't found an etchant I'm thrilled with yet--once I do, some pictures will be posted. Sadly, I think I deleted my WIP of this knife, I'll try to take some more as the project progresses. More detail of the junker knives, both etched in sulfuric acid (~4M). The first, like the seax, was left in the solution for a couple hours. Edited May 9, 2015 by Isaac Myers Link to comment Share on other sites More sharing options...
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!Register a new account
Already have an account? Sign in here.Sign In Now