Craig Hashimoto Posted October 20, 2015 Share Posted October 20, 2015 (edited) Aloha Gang, OK ... here's the last of the wrought iron from my stash that I am going to offer up... saving the rest for me... Small to large sizes for those who want it for hand work or power work... all from the same source... circa 1800s Cut a few notches in the small stock so you could see... only have a limited of the larger so did not notch those... Here are the sizes and approximate availability.... smaller sizes are about 12" long... wider sizes are shorter down to 7" I'll weigh them and the price is $2.50 a pound plus $11 shipping priority insured with tracking to the USA only... I'll keep the weight on these around 40 pounds per box 1/2" - 13 pieces - Gone 5/8" - 12 pieces - Gone 3/4" - 80 pieces 7/8" - 35 pieces - Gone 1 1/8" - 50 pieces - Gone 1 1/4 - 4 pieces - Gone 1 3/8" - 3 pieces - Gone Hope that helps folks with their projects or just to try out some smaller pieces with a hand hammer.... Have a great week all! Take Care and God Bless, Craig Edited January 27, 2016 by Craig Hashimoto Link to comment Share on other sites More sharing options...
J.Thompson Posted October 20, 2015 Share Posted October 20, 2015 Craig, Ill take all three 1 3/8" bars, all 4 of the 1 1/4 and the fill the rest with the 1 1/8 until you reach your limit of 30 to 35lbs. Send me a total when you get it figured out and Ill pay promptly. Thanks, John Thompson Link to comment Share on other sites More sharing options...
JPH Posted October 20, 2015 Share Posted October 20, 2015 Hey...I'll take 30/35# worth of the 1 1/8" rnd..if you have that much left..if not...fill the rest with the 7/8"..send me a total and we are a goi.. JPH If you wish to know the price of freedom..Visit a Veteran's Hospital...I am humbled by their sacrifice... Why is it when the Mighty Thor throws his hammer he is dispensing Justice and fighting Evil..BUT..when I throw my hammer I wind up in a mandatory 16 week anger management course??</p> I came into this world naked, screaming and covered in someone else's blood...I have no problem going out the same way... Link to comment Share on other sites More sharing options...
Craig Hashimoto Posted October 21, 2015 Author Share Posted October 21, 2015 Aloha J.Thompson and JPH, Thanks... I'll work on weighing out what I have and get back with you a little later today.... Thanks for all the interest gang... I've SPF'd the sizes of interest for now... I'll confirm if there is anything left in those sizes when I'm done taking care of J. Thompson and JPH.... Have a great evening all! Take Care and God Bless, Craig Link to comment Share on other sites More sharing options...
Collin Miller Posted January 2, 2016 Share Posted January 2, 2016 Aloha J.Thompson and JPH, Thanks... I'll work on weighing out what I have and get back with you a little later today.... Thanks for all the interest gang... I've SPF'd the sizes of interest for now... I'll confirm if there is anything left in those sizes when I'm done taking care of J. Thompson and JPH.... Have a great evening all! Take Care and God Bless, Craig Do you still have any of the 3/4" wrought for sale? Thanks in advance! “If you trust in yourself. . . believe in your dreams. . . and follow your star. . . you will still get beaten by the people who have spent their time working hard and learning things, the people who weren't so lazy.” ~ Terry Pratchett Link to comment Share on other sites More sharing options...
Craig Hashimoto Posted January 2, 2016 Author Share Posted January 2, 2016 (edited) Do you still have any of the 3/4" wrought for sale? Thanks in advance! Aloha Collin, Sorry for the delay... Yes I do have 3/4... also have two pieces of the wrought wagon wheel rims that a local guy never picked up... so that's available as well... they are here http://www.bladesmithsforum.com/index.php?showtopic=32116 Let me know how much you want and I'll get back with you.... Thanks for the interest and Happy New Year! Take Care and God Bless, Craig Edited January 2, 2016 by Craig Hashimoto Link to comment Share on other sites More sharing options...
Collin Miller Posted January 3, 2016 Share Posted January 3, 2016 Aloha Collin, Sorry for the delay... Yes I do have 3/4... also have two pieces of the wrought wagon wheel rims that a local guy never picked up... so that's available as well... they are here http://www.bladesmithsforum.com/index.php?showtopic=32116 Let me know how much you want and I'll get back with you.... Thanks for the interest and Happy New Year! Take Care and God Bless, Craig Awesome! I'll take the two wagon wheel chunks, and fill the rest of the box up with 3/4" round. Should be $86? What payment method would work for you? If you can do paypal, just send me an invoice at collinmillerknives@gmail.com Thanks again! “If you trust in yourself. . . believe in your dreams. . . and follow your star. . . you will still get beaten by the people who have spent their time working hard and learning things, the people who weren't so lazy.” ~ Terry Pratchett Link to comment Share on other sites More sharing options...
Craig Hashimoto Posted January 3, 2016 Author Share Posted January 3, 2016 Awesome! I'll take the two wagon wheel chunks, and fill the rest of the box up with 3/4" round. Should be $86? What payment method would work for you? If you can do paypal, just send me an invoice at collinmillerknives@gmail.com Thanks again! Aloha Collin, PM sent... Thanks again... Happy New Year! Take Care and God Bless, Craig Link to comment Share on other sites More sharing options...
Craig Hashimoto Posted January 27, 2016 Author Share Posted January 27, 2016 (edited) Aloha Gang,This is the very last of the 1800s wrought iron round bar that I will offer up...I am keeping what's remaining for myself... but had an inquiry from a member here who wanted to see if I had any left in the past week and after shipping their box off yesterday... this is what is left...So I figured I'd offer it up to folks who were looking for smaller bars to hand forge on last chance to pick this up....Here's what's left....13 - 1/2" diameter bars about 11+ inches long @12lbs for all 13 of them - ALL GONE80 - 3/4" diameter bars about the same length @1.5lbs each bar... - ALL GONEPricing will be the same by the pound rate as the other wrought I have offered here... $2.50 a pound plus shippingI'll ship in flat rate boxes so shipping will be $12.... pp accepted and fees appreciated but not required....I'll update availability here as bars are shipped out.You can email me directly at..... buckandbison at yahoo dot comeThanks for taking a look....Have a great week!Take Care and God Bless,C Edited January 28, 2016 by Craig Hashimoto Link to comment Share on other sites More sharing options...
Daniel Cauble Posted February 11, 2016 Share Posted February 11, 2016 Is there any left from any stashes? I came a little late in this one. My Youtube channel: https://www.youtube.com/user/TAGMushy/videos Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now