Jump to content

What did you do in your shop today?


Joshua States
 Share

Recommended Posts

This morning Liz had some forging to do before the sun hit the shop/garage doors. Here she is working the LG.

 

Liz at he LG.jpg

 

Then she went to deliver two more pieces to the Flagstaff Arboretum. She has sold 4 pieces already at this show.

Then I finished stripping the work trailer down to the frame in preparation for making it into a flatbed.

 

Trailer frame.jpg

 

I probably picked the wrong day for this, but it's not getting any cooler anytime soon. This is inside the shop door in the shade.

 

Thermometer.jpg

Edited by Joshua States

“So I'm lightin' out for the territory, ahead of the scared and the weak and the mean spirited, because Aunt Sally is fixin’ to adopt me and civilize me, and I can't stand it. I've been there before.”

The only bad experience is the one from which you learn nothing.  

 

Josh

http://www.dosgatosdesignsllc.com/#!

https://www.youtube.com/channel/UCdJMFMqnbLYqv965xd64vYg

J.States Bladesmith | Facebook

https://www.facebook.com/dos.gatos.71

https://www.etsy.com/shop/JStatesBladesmith

Link to comment
Share on other sites

After soaking in vinegar for 2 days, got the scale off and ground this down to 0.125" for a friend.  4" x 12" 300 layers 1080/15N20.  Here it is ground to 400 grit and 15 min in vinegar

20210612_191758.jpg

 

  • Like 2
RIP Bear....be free!

 

as always

peace and love

billyO

 

 

Link to comment
Share on other sites

I've been working on a shibuichi butterfly carving for practice this past week and it turned out nicer than expected so I decided I'd start working on inlaying it into a larger composition. So on Sunday, I cast additional alloys to widen my color palette: some sterling 950 from melting old goblets, which will serve as the main body of the piece, and a good chunk of 40% silver shibuichi for a light grey (butterfly is 20% silver, which patinates quite dark).

 

mM8v8u7.jpg

 

I cold worked part of the shibuichi and rolled it as well as some copper into ~2mm sheets for two additional inlays. I rolled and shaped the silver into the beginning of a pendant, textured the back and raised a slight border.

 

n2ECCJi.jpg

 

EgOxVww.jpg

 

I also milled round channels in a piece O1 to shape gold wire into half-round, hoping that I'll be able to turn that into a very thin raised inlay (as opposed to a flush wire inlay), we'll see how that goes.

 

F8FYJBT.jpg

 

What do you mean this has nothing to do with bladesmithing? :P


 

  • Like 3
Link to comment
Share on other sites

Received this lovely trial set of Karelian Birch  blocks from a new supplier in the Ukraine. 

 

Karelian Birch.jpg

  • Like 2

Von Gruff

http://www.vongruffknives.com/

The ability to do comes with doing.

 

 

add resized.png

Link to comment
Share on other sites

Todays exercise was to grind the bevels in on these two (hardened and tempered) and get them handsanded.

IMG_20210618_111623.jpg

 

IMG_20210618_160118.jpg

  • Like 1

Von Gruff

http://www.vongruffknives.com/

The ability to do comes with doing.

 

 

add resized.png

Link to comment
Share on other sites

Got my first 72" grinder up and running. I tested it out and profiled a little edc. What would normally take me 20 minutes took me 5 minutes. Looking forward to some bigger knife projects in the future.

20210617_170811.jpg

20210617_170755.jpg

  • Like 9
Link to comment
Share on other sites

On 6/19/2021 at 5:31 AM, Faye said:

Got my first 72" grinder up and running.

Making it happen! Woo Hoo!

 

I finished my trailer project. The only thing left is decide if I want to put another tool box on it.

V2 Trailer done (1).jpg

V2 Trailer done (2).jpg

V2 Trailer done (3).jpg

  • Like 2

“So I'm lightin' out for the territory, ahead of the scared and the weak and the mean spirited, because Aunt Sally is fixin’ to adopt me and civilize me, and I can't stand it. I've been there before.”

The only bad experience is the one from which you learn nothing.  

 

Josh

http://www.dosgatosdesignsllc.com/#!

https://www.youtube.com/channel/UCdJMFMqnbLYqv965xd64vYg

J.States Bladesmith | Facebook

https://www.facebook.com/dos.gatos.71

https://www.etsy.com/shop/JStatesBladesmith

Link to comment
Share on other sites

12388F03-0AA2-4162-B7A4-6581B0F1E92E.jpegI’ve had a little bit of time this week to work on these. The nakiri is twist Damascus getting a walnut crotch handle and I’m not sure for the paring knife yet. 

 

Edited by Conner Michaux
  • Like 4
Link to comment
Share on other sites

I finally had the phone in the shop and tried pictures of what I just finished, and to prove to folks who don't know me that I do make blades, and not sit online all day;):20210621_110459a.jpg

 

1080/15N20 from the end of a crushed-w billet that the rest ended up here: 

 

*sigh* . . . now I have more handle work to do....:angry:

 

  • Like 3
RIP Bear....be free!

 

as always

peace and love

billyO

 

 

Link to comment
Share on other sites

4 hours ago, billyO said:

I do make blades

And pretty nice looking ones at that! That looks cool Billy. Kitchen knives?

Edited by Joshua States

“So I'm lightin' out for the territory, ahead of the scared and the weak and the mean spirited, because Aunt Sally is fixin’ to adopt me and civilize me, and I can't stand it. I've been there before.”

The only bad experience is the one from which you learn nothing.  

 

Josh

http://www.dosgatosdesignsllc.com/#!

https://www.youtube.com/channel/UCdJMFMqnbLYqv965xd64vYg

J.States Bladesmith | Facebook

https://www.facebook.com/dos.gatos.71

https://www.etsy.com/shop/JStatesBladesmith

Link to comment
Share on other sites

45 minutes ago, Joshua States said:

And pretty nice looking ones at that! That looks cool Billy. Kitchen knives?

Thanks, Joshua.  Yep, that's mostly what I do.  This one has a 6 3/4" (175cm) cutting edge.

  • Like 1
RIP Bear....be free!

 

as always

peace and love

billyO

 

 

Link to comment
Share on other sites

I got a new toy to play with and started to get it put together today. I got a good cast iron mill table at a great price a while back so bought a mill head to complete the unit. Built a cupboard and bolted it to the floor to make sure there is no movment then screwed a 3/8 steel plate on top to bolt the mill table to. Have got everything drilled and tapped and just have to weld a length of 6x2 box and a 6x1/2 plate to bolt the mill head to. Will get that done tomorrow if all goes well and it will be all ready for assembly.

 

IMG_20210623_090403.jpg

 

IMG_20210623_164645.jpg

  • Like 5

Von Gruff

http://www.vongruffknives.com/

The ability to do comes with doing.

 

 

add resized.png

Link to comment
Share on other sites

This box of blocks arrived this morning after its adventure with the biosecurity people.Some more beautiful wood from Jason in TX .Some more Hickory burl, Koa, high grade walnut, yellow cedar burl and a single piece of desert ironwood along with the really nice piece of double dyed buck eye burl on the right. I saw that block on his fB page and couldnt go past getting a few others to keep it company on its journey over to me

IMG_20210624_090854.jpg

 

177603855_190475532893684_5409702847544709215_n.png

Von Gruff

http://www.vongruffknives.com/

The ability to do comes with doing.

 

 

add resized.png

Link to comment
Share on other sites

Starting to think I prefer making forges more than forging hahaha, also I can't seem to find steel cheap enough :(

Link to comment
Share on other sites

after getting the handles all done on a carving knife and fork set along with a cimeter and a nakiri I got a couple of neighbours in to help me get the mill head up and bolted into position so really quite pleased with progress for the day.

IMG_20210627_163454.jpg

IMG_20210627_163502.jpg

 

  • Like 3

Von Gruff

http://www.vongruffknives.com/

The ability to do comes with doing.

 

 

add resized.png

Link to comment
Share on other sites

Made myself a new air supply. 3 hair dryer fans powered by 12v@1.5amp. Shown at 3/4ish power. 

Link to comment
Share on other sites

 Garry; you are going to love havin that mill drill in the shop !

And after a while you will wonder how you got along with out it fer so long.........:D

Edited by Clifford Brewer

If ya can't be good don't git caught  !!                                        People who say stuff can't be done need to

                                                                                                        git the hell outta the way of people who do stuff   !!!

Show me a man who is called an expert by his peers         

And I will show you a good man to listen to ......

Show me a man who calls himself an expert

and I will show you an egotistical asshole...............!!

 

                             

Link to comment
Share on other sites

20 minutes ago, Clifford Brewer said:

 Garry; you are going to love havin that mill drill in the shop !

And after a while you will wonder how you got along with out it fer so long.........:D

Just got to get a couple of bits and pieces for the tooling drawer but I am already at the stage of wondering why it took so long to get one. The major reason for getting it was for guard slotting and fuller grinding but I am sure there are going to be  a great deal more reasons as time goes by.

 

  • Like 1

Von Gruff

http://www.vongruffknives.com/

The ability to do comes with doing.

 

 

add resized.png

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...