Jump to content

easiest and cheapest way to get into graving?


Recommended Posts

I think I'm going to make a homemade graver machine. There are a few tutorials on youtube. The question I have does anyone have any tutorials on making the graver bits? I have a bunch of garage door spring and was told they make great gravers. Any recommendations?

thanks, Chris

Link to post
Share on other sites

You can make gravers from W1 drill stock.
Its inexpensive, known steel that will harden nicely.
I've seen and have made a decent amount of gravers from this steel and it performs great.
Past that.
You need the geometry to be right and you need a highly polished set of faces or the graver just drags and jumps etc.
You can make hand push gravers or hammer and chisel style or can go with a machine.

Link to post
Share on other sites
  • 1 month later...
  • 3 weeks later...

this may not be exactly what your looking for, but I recently made a set of gravers from old worn out 3 corner files. keeping in mind that yes the angles have got to be right in order to work, they have gone through a few of my test passes with out chipping (as some may say is going to happen because I didn't mess with the ht of these files). the tips are holding out decently. I should say that I am doing this as a hammer engraving process.

 

originally I made these to do inlay work in the future, but I've had some really surprising success with what I think is called the Lindsey style of points. I don't have the angles prefect, which leads me to believe that you can have some play with these tools, although, each bevel has to be pretty consistently equal to its opposite side.

 

I got some pictures of my work with a crummy camera - these are some of my first attempts at actual hammered engraving. the tools are not exact to the Lindsey style but their following his examples.

0830161422a.jpg

0830161424a.jpg

0902161553a.jpg

Link to post
Share on other sites
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...