Jump to content

A few recent knives.........


Karl B. Andersen
 Share

Recommended Posts

I figured I'd toss in a few knives I've been working on lately.

Here's a San-mai with Ringed Gidgee and Mammoth tooth:

SMMTaa-1_zpscumsjtuz.jpg

 

SMMTbb-1_zpsqrbafqmy.jpg

 

SMMTdd-1_zpstbbv2oqp.jpg

 

SMMTcc-1_zpsfvkk2si2.jpg

 

A Transition Damascus Bowie with Koa and wrought iron:

 

TDdd-1_zpsyr9qqxzt.jpg

TDee-1_zpsaruark35.jpg

 

A San-mai hunter with sentimental Walnut provided by the customer:

 

SMH1-1_zpsmy5yy8by.jpg

SMH2--1_zps7lazsg9m.jpg

 

Cru-Forge-V and African Blackwood:

 

ABHcc-1_zpsb9o9akun.jpg

 

ABHdd--1_zpsyarkxqie.jpg

 

 

  • Like 1
Link to comment
Share on other sites

Very nice, to say the least!!! I especially like the one with the  Mammoth tooth. When I first got into knife making your name and one other are two names that my adopted mentor gave me, He said when I saw anything connected to these two names to pay attention. He sure was right, every time I look at your work, I see how much more I have to go!!! The one thing I have learned is that the camera doesn't lie. I have taken pics of a piece and see a flaw that I did not know existed. I had to go back to the piece and sure enough it was there but, my eye had overlooked it before!!

Where in the world did you find bakelite in that large of piece to be able to make the entire handle from it!! If that is a trade secret don't worry about answering!:lol:

 

Your work is flawless Karl!  bow

Edited by C Craft

C Craft Customs ~~~ With every custom knife I build I try to accomplish three things. I want that knife to look so good you just have to pick it up, feel so good in your hand you can't wait to try it, and once you use it, you never want to put it down ! If I capture those three factors in each knife I build, I am assured the knife will become a piece that is used and treasured by its owner! ~~~ C Craft

Link to comment
Share on other sites

6 minutes ago, C Craft said:

Where in the world did you find bakelite in that large of piece to be able to make the entire handle from it!!

There were some large sheets of this bolted to a wall in a basement building in Wisconsin. It's 1 1/8" thick.

The fuse boxes - dated 1918 I think - were bolted to the sheets of Bakelite. The building was under re-hab and some of the workers were cutting this up and tossing it in the dumpster when a friend of mine, who was part f the re-hab, noticed this and had them throw the pieces into his truck instead!! I was lucky enough to get some.

 

Link to comment
Share on other sites

When you said a few, I was thinking two or three, but that was a treat!   Gorgeous knives, but I especially love the W2/Curly Oak, and the San Mai/Bakelite knives.  

“In the midst of winter, I found there was, within me, an invincible summer."  -Albert Camus

http://www.krakenforge.net/

Link to comment
Share on other sites

nice! i love the curly oak one and the last one. i have some curly oak like that that i found out in my field, but it has a bunch of insect holes <_< bummer.

 

Link to comment
Share on other sites

All I can do is stare in awe at this stuff  !!..............:o

If ya can't be good don't git caught  !!                                        People who say stuff can't be done need to

                                                                                                        git the hell outta the way of people who do stuff   !!!

Show me a man who is called an expert by his peers         

And I will show you a good man to listen to ......

Show me a man who calls himself an expert

and I will show you an egotistical asshole...............!!

 

                             

Link to comment
Share on other sites

Karl, thanks for the heads-up. I knew I had not seen anything like that in years! I did construction for years and when I think of some of the stuff I tossed in a dumpster because it was part of the job........... it makes me sick sometimes!!!

 

I love your work and the finished product does all of the talking. Superb pieces!! Top shelf indeed!! 

C Craft Customs ~~~ With every custom knife I build I try to accomplish three things. I want that knife to look so good you just have to pick it up, feel so good in your hand you can't wait to try it, and once you use it, you never want to put it down ! If I capture those three factors in each knife I build, I am assured the knife will become a piece that is used and treasured by its owner! ~~~ C Craft

Link to comment
Share on other sites

Karl - I have one sheet of curly oak, and I LOVE it. I am staining it with Aqua Fortis, and doing a grain filling finish with oil like you would with an old English shotgun. It is beautiful stuff, isn't it?

The piece I lucked into is 1/8" x 7x24. So, it really only makes slabs. But man, what cool slabs it makes. I pinned some on a knife this morning. I will be done if a few days with it.

 

 

I love your output. Those are all great. I like the transition Damascus the best, but that is because it is a cool trick. They all look very nice.

kc

Edited by Kevin (The Professor)

please visit my website http://www.professorsforge.com/

 

“Years ago I recognized my kinship with all living things, and I made up my mind that I was not one bit better than the meanest on the earth. I said then and I say now, that while there is a lower class, I am in it; while there is a criminal element, I am of it; while there is a soul in prison, I am not free.” E. V. Debs

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...