Jump to content

The Lake Sword


MLenaghan
 Share

Recommended Posts

9 hours ago, MLenaghan said:

The antler is nice piece of elk and 95% solid, I think the pictures are showing really rough grinding marks... also I have a sword with the entire grips antler and it's held up really well even after grinding pretty thin, then again with my luck it will fall over and break in half :ph34r:

 

As for the why? haha not sure I can really answer that! my wife says I cant sit still or relax... and bladesmithing has always been a great creative outlet for me... and I've always kept it a hobby and tried to avoid selling blades as it adds stress to something that I use to fight my stress! Also means I can have complete control of my project without having to worry about other input, unless it's wanted of course. As to why blades like this well I love historical swords, and making copies of some have taught me a great deal about the design, construction and overall feel of a sword it's still more or less following a blueprint. My day jobs is a custom TIG welder but most days I'm still following someone else design... a sword like this one is a open idea in the sense If Dave used this design, I'm sure the sword would look very different! If 10 smiths made this sword you'd have 10 different blades. but honestly I suck with words for this stuff, if we ever meet in person it's something I'd love to discuss around a camp fire and some cold dark beer! 

Thanks for taking the time to answer my question. I like the answer! It is hard to describe what drives us to others but, inside you know you just got to follow that feeling!! 

Best of luck and I can't wait to see this one when it is done!!

C Craft Customs ~~~ With every custom knife I build I try to accomplish three things. I want that knife to look so good you just have to pick it up, feel so good in your hand you can't wait to try it, and once you use it, you never want to put it down ! If I capture those three factors in each knife I build, I am assured the knife will become a piece that is used and treasured by its owner! ~~~ C Craft

Link to comment
Share on other sites

  • 3 weeks later...
  • 4 weeks later...

Well have some work to show as of now, I weld and polish a lot of stainless steel for my day job so lack the motivation to come home and polishing a sword but it's at a point that's showing off the blade construction and the hearth steel so I'm happy! Also been carving the handle and getting all the pieces to fit which is time consuming work. Without rushing it the goals to finish before the new year, and maybe spend another 6 months making a sheath hahah :P

IMG_20171106_184649_156.jpg20171120_180656_resized_01.JPG20171120_180701_resized_01.JPG20171120_180711_resized_01.JPG

  • Like 5

-Michael Lenaghan

Link to comment
Share on other sites

This is so cool. Would you mind sharing a bit more about how you made your hearth steel? I'm mainly wondering about charge weights, and frequencies. I love japanease culture, but I don't have time or resources for a full on tatara smelt. Seems you've found a way around all that. Very cool sword. 

Link to comment
Share on other sites

That blade is just awesome, it is a showpiece in it's own right!!

C Craft Customs ~~~ With every custom knife I build I try to accomplish three things. I want that knife to look so good you just have to pick it up, feel so good in your hand you can't wait to try it, and once you use it, you never want to put it down ! If I capture those three factors in each knife I build, I am assured the knife will become a piece that is used and treasured by its owner! ~~~ C Craft

Link to comment
Share on other sites

Really a great project! Thanks for the detailed WIP!

-----------------------------------------------

"It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood, who strives valiantly; who errs and comes short again and again; because there is not effort without error and shortcomings; but who does actually strive to do the deed; who knows the great enthusiasm, the great devotion, who spends himself in a worthy cause, who at the best knows in the end the triumph of high achievement and who at the worst, if he fails, at least he fails while daring greatly." -- Theodore Roosevelt

http://stephensforge.com

Link to comment
Share on other sites

Duuude! That steel looks like something from outer space! 

“If you trust in yourself. . . believe in your dreams. . . and follow your star. . . you will still get beaten by the people who have spent their time working hard and learning things, the people who weren't so lazy.” ~ Terry Pratchett

 

Link to comment
Share on other sites

I love the steel, the handle design, the blade shape... Epic.

George Ezell, bladesmith

" How much useful knowledge is lost by the scattered forms in which it is ushered to the world! How many solitary students spend half their lives in making discoveries which had been perfected a century before their time, for want of a condensed exhibition of what is known."
Buffon


view some of my work

RelicForge on facebook
Link to comment
Share on other sites

WOW thanks a lot you guys for the positive responses! Haven't been on the forum as much but this reminds me why it's the best place on the internet!!!:D

hi Zeb Camper, I don't have a formula for hearth steel, and to be honest learnt everything from the bottons and bloomers thread here and hanging out at Scott Roush place.. honestly I get the hearth running till there's a couple good "drops" in the charcoal , then I stick a long thin rod or nail into the center of it, wait a few minutes and pull it out. if the tips melted off and sparkling I know it's ready. After that it's a small handful of nails or little bolts ever "drop" or 2nd drop. I'll throw small amounts of beach sand in randomly for a little slag. I'll run it till it doesnt wanna take any more and then pull it. this is normally 3-4 beers in...     goodluck!

Hi Peter Fontenla, the blades a little different, it's like a large bronze age leaf blade, hollow ground with a shallow double fuller. The center rib is rather thick but tapers very fast to the edge. 

blades 730 grams,  71.5 cm length   88cm overall

53mm wide at the base and 6mm thick tapering to 3mm about 10 cm from the tip

 

 

  • Like 1

-Michael Lenaghan

Link to comment
Share on other sites

  • 2 weeks later...

Well I'm happy to say the lake sword is complete! Been a long project well over a year and many attempts in the making, and the biggest thing I'm taking away from this is really taking the time and extra effort seems to go a long way.  Another huge thanks to David DelaGradelle for letting me base this sword off of his design! Now I find myself is a strange place with out a big project on the go, need to get back to the forge :D

 

IMG_20171206_182705_591.jpgIMG_7245_01.JPGIMG_7251.JPGIMG_7258.JPGIMG_7271.JPGIMG_7259.JPG

  • Like 4

-Michael Lenaghan

Link to comment
Share on other sites

Holy crap Michael, that is superb work!  David's design is gorgeous, and you did it justice.  This is a fantastic piece of art Michael.  

“In the midst of winter, I found there was, within me, an invincible summer."  -Albert Camus

http://www.krakenforge.net/

Link to comment
Share on other sites

That's even better than I was expecting, and that's saying something!:o  what is that written on the pommel plate?  I can't quite make it out...

Anyway, in recognitions of the spirit and skill that went into this, I hereby nominate you for a Fiery Beard!  Unless you already have one, I don't remember... but you deserve one anyway.  Do I hear a second?

  • Like 2
Link to comment
Share on other sites

3 hours ago, Alan Longmire said:

That's even better than I was expecting, and that's saying something!:o  what is that written on the pommel plate?  I can't quite make it out...

Anyway, in recognitions of the spirit and skill that went into this, I hereby nominate you for a Fiery Beard!  Unless you already have one, I don't remember... but you deserve one anyway.  Do I hear a second?

I'll second that.

That sword is mind-blowingly awesome.

George Ezell, bladesmith

" How much useful knowledge is lost by the scattered forms in which it is ushered to the world! How many solitary students spend half their lives in making discoveries which had been perfected a century before their time, for want of a condensed exhibition of what is known."
Buffon


view some of my work

RelicForge on facebook
Link to comment
Share on other sites

A project to be proud of! Well done, man! I dig it.

-----------------------------------------------

"It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood, who strives valiantly; who errs and comes short again and again; because there is not effort without error and shortcomings; but who does actually strive to do the deed; who knows the great enthusiasm, the great devotion, who spends himself in a worthy cause, who at the best knows in the end the triumph of high achievement and who at the worst, if he fails, at least he fails while daring greatly." -- Theodore Roosevelt

http://stephensforge.com

Link to comment
Share on other sites

Congratulations Michael! Fire it up!

Most impressive indeed.

“So I'm lightin' out for the territory, ahead of the scared and the weak and the mean spirited, because Aunt Sally is fixin’ to adopt me and civilize me, and I can't stand it. I've been there before.”

The only bad experience is the one from which you learn nothing.  

 

Josh

http://www.dosgatosdesignsllc.com/#!

https://www.youtube.com/channel/UCdJMFMqnbLYqv965xd64vYg

J.States Bladesmith | Facebook

https://www.facebook.com/dos.gatos.71

https://www.etsy.com/shop/JStatesBladesmith

Link to comment
Share on other sites

On 11/21/2017 at 10:37 PM, MLenaghan said:

Well have some work to show as of now, I weld and polish a lot of stainless steel for my day job so lack the motivation to come home and polishing a sword but it's at a point that's showing off the blade construction and the hearth steel so I'm happy! Also been carving the handle and getting all the pieces to fit which is time consuming work. Without rushing it the goals to finish before the new year, and maybe spend another 6 months making a sheath hahah :P

IMG_20171106_184649_156.jpg20171120_180656_resized_01.JPG20171120_180701_resized_01.JPG20171120_180711_resized_01.JPG

My jaw hit the ground when i seen these pictures!! Awesome blade!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...