Jump to content

Back in the game


Alan Longmire
 Share

Recommended Posts

On ‎12‎/‎1‎/‎2017 at 5:58 AM, Alan Longmire said:

Dunlap Woodcrafts out of Virginia.

Strange website. No photos and they say they offer knife handle blanks, but no info on what or how much they cost.......

Lots of wood choices though. I would be nice to see some representative pictures.

“So I'm lightin' out for the territory, ahead of the scared and the weak and the mean spirited, because Aunt Sally is fixin’ to adopt me and civilize me, and I can't stand it. I've been there before.”

The only bad experience is the one from which you learn nothing.  

 

Josh

http://www.dosgatosdesignsllc.com/#!

https://www.youtube.com/channel/UCdJMFMqnbLYqv965xd64vYg

J.States Bladesmith | Facebook

https://www.facebook.com/dos.gatos.71

https://www.etsy.com/shop/JStatesBladesmith

Link to comment
Share on other sites

Unfortunately, they don't have pictures.  It's a small family-run company, and Wayne the owner didn't even want to have a website.  Your best bet is to call the warehouse using the number from the site.  That will get you Daniel Miranda, the lone employee.  Tell him what you're after and trust him, that's about all you can do.  Wayne is fun to talk with, but he's really good at talking you into buying something you didn't call to ask for, like the time he talked me into a pair of handles made from European yellow ash from somebody's yard in Fairfax.  Or the curly  American Chestnut handle from a log that had been lying in a sheltered spot for at least 75 years.  I've bought hundreds of handles from them over the years, and only one was nonusable due to a little crack at the top.  Wayne sent me a free replacement with the next order with only my word there was a bad handle.  He didn't want a picture or the handle back.  Told me to use it for firewood, in fact.  They're happy to work with you on custom stuff as well.  I had an order once for a hawk with a 24" handle in presentation-grade curly ash.  Wayne's 5-axis pantograph router-lathe thingy only does 19.5" handles.  He sent me a 26" long 3x3 of the nicest ash I'd ever seen, with a uniform tight curl at around 7 curls per inch, with a 1/4" hole already drilled down the dead center.  For $20.  

So yes, it's too bad they don't have a "buy the one you see here" option, but they're good people.  

Oh, and the handle profile on the premade blanks is a match to the hawk drift sold by Norm Wendell's Iron Mountain.  The drift from Blacksmith's Depot, etc. is a copy made by using one of Norm's as the pattern, then sand-casting with a coarser grade of sand.  So you get the shrinkage AND a rougher surface.

Link to comment
Share on other sites

Good to see your work again!  The browning really does make the inlay stand out.  The knife is pretty cool too.

George Ezell, bladesmith

" How much useful knowledge is lost by the scattered forms in which it is ushered to the world! How many solitary students spend half their lives in making discoveries which had been perfected a century before their time, for want of a condensed exhibition of what is known."
Buffon


view some of my work

RelicForge on facebook
Link to comment
Share on other sites

On 12/3/2017 at 12:23 PM, Alan Longmire said:

Unfortunately, they don't have pictures.  It's a small family-run company, and Wayne the owner didn't even want to have a website.  Your best bet is to call the warehouse using the number from the site.  That will get you Daniel Miranda, the lone employee.  Tell him what you're after and trust him, that's about all you can do.  Wayne is fun to talk with, but he's really good at talking you into buying something you didn't call to ask for, like the time he talked me into a pair of handles made from European yellow ash from somebody's yard in Fairfax.  Or the curly  American Chestnut handle from a log that had been lying in a sheltered spot for at least 75 years.  I've bought hundreds of handles from them over the years, and only one was nonusable due to a little crack at the top.  Wayne sent me a free replacement with the next order with only my word there was a bad handle.  He didn't want a picture or the handle back.  Told me to use it for firewood, in fact.  They're happy to work with you on custom stuff as well.  I had an order once for a hawk with a 24" handle in presentation-grade curly ash.  Wayne's 5-axis pantograph router-lathe thingy only does 19.5" handles.  He sent me a 26" long 3x3 of the nicest ash I'd ever seen, with a uniform tight curl at around 7 curls per inch, with a 1/4" hole already drilled down the dead center.  For $20.  

So yes, it's too bad they don't have a "buy the one you see here" option, but they're good people.  

Oh, and the handle profile on the premade blanks is a match to the hawk drift sold by Norm Wendell's Iron Mountain.  The drift from Blacksmith's Depot, etc. is a copy made by using one of Norm's as the pattern, then sand-casting with a coarser grade of sand.  So you get the shrinkage AND a rougher surface.

Alan when you first told me who, it did not click but I have bought muzzleloader blanks from them and I think it is Daniel, (I have the name wrote down somewhere) but, you are right you have to trust them but never had them do me wrong on a muzzleloader blank. Daniel (if that is the one) sold me a blank as a cheaper grade and told me that unless he missed his guess it was gonna be close to one of the best. He didn't miss his guess i was well pleased with it!!

C Craft Customs ~~~ With every custom knife I build I try to accomplish three things. I want that knife to look so good you just have to pick it up, feel so good in your hand you can't wait to try it, and once you use it, you never want to put it down ! If I capture those three factors in each knife I build, I am assured the knife will become a piece that is used and treasured by its owner! ~~~ C Craft

Link to comment
Share on other sites

1 hour ago, John N said:

good to see you back at it Alan, very satisfying looking couple of pieces of work :) - hope you and yours are keeping well. 

Very well indeed, sir!  Hope the same goes for you.  And just wait til you see what's next, assuming it survives the quench and making the fittings doesn't drive me more nuts than I already am...;)

Link to comment
Share on other sites

Alan, I missed this before. Welcome back!

 

please visit my website http://www.professorsforge.com/

 

“Years ago I recognized my kinship with all living things, and I made up my mind that I was not one bit better than the meanest on the earth. I said then and I say now, that while there is a lower class, I am in it; while there is a criminal element, I am of it; while there is a soul in prison, I am not free.” E. V. Debs

Link to comment
Share on other sites

For what it's worth, I live about 15 minutes from Dunlap, and if someone wants something specific that needs eyes-on before buying, I can be bribed/cajoled/asked to make a trip over there.

 

Beautiful work, Alan, just the kind of thing I have been hoping you'd make one of these days after you got rid of the production work. 

The Tidewater Forge

Christopher Price, Bladesmith

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...