Jump to content
Sign in to follow this  
Alveprins

Veðrfölnir, the "Storm Pale"

Recommended Posts

Let me present Veðrfölnir - named after the hawk with the same name, which sits atop Yggdrasil - the world tree.

Description - blade:
The blade is made from three bars of folded and twisted steel. Two bars are made from railroad steel from the Numedal Railroad here in Numedal, while the bar for the edge is made from Farriers rasps mixed with 15n20 steel.

Hardness at edge: 58 HRC

Description - handle:
The handle is made from stabilized grey Maple, Holly, Brass, white vulcanized fiber as well as mammoth ivory which is between 10 000 - 30 000 years old. The handle is engraved with Elder Futhark runes, written in English. The text reads:

"Better to die with Honor, than live with Shame" followed by owners name and surname initial. The engravings has been filled in with ashes.

Description - sheath:
The sheath is in vegetable tanned leather with certain engravings, stitched using grey tiger thread and saddle makers stitches. Stained in antique black leather stain and treated with antique leather fat.

Vethfolfnir-1.jpg

Vethfolfnir-2.jpg

Vethfolfnir-3.jpg

Vethfolfnir-4.jpg

 

Vethfolfnir-7.jpg

Vethfolfnir-5.jpg

Vethfolfnir-8.jpg

Vethfolfnir-6.jpg

 

Any comments, input, critique and suggestions are as always - very welcome. :)

Sincerely, Alveprins.

  • Like 6

Share this post


Link to post
Share on other sites

I never use the term "awesome" but I think I will make an exception,

 

"Awesome!!!"

  • Thanks 1

Share this post


Link to post
Share on other sites

Lovely work. How did you do the grooves on the handle-slabs? They look very smooth.

  • Thanks 1

Share this post


Link to post
Share on other sites

Looking good!  That one has a really crisp transition to the edge bar.  I'd say you have mastered that air hammer...

  • Thanks 1

Share this post


Link to post
Share on other sites
7 hours ago, Charles du Preez said:

Lovely work. How did you do the grooves on the handle-slabs? They look very smooth.

Thanks man!

I did them with files, and of course very fine grit sanding paper wrapped around the files.

2 hours ago, Brian Dougherty said:

Looking good!  That one has a really crisp transition to the edge bar.  I'd say you have mastered that air hammer...

Thanks! Yeah, I'm getting increasingly skilled with the air hammer. :) Shaping the curve etc. I do by hand though - obviously. My air hammer is not exactly a tool for accuracy... :lol:

Share this post


Link to post
Share on other sites

I love the handle, beautiful work overall.

  • Thanks 1

Share this post


Link to post
Share on other sites

Exceptional is about all I can say.  Anything else is just superlative.

If you go back to the same bar the edge is forged from at the ricasso you will get a better idea of the hardness of the edge which can also be thrown off by the fact that you are measuring the hardness of two steels.  Then again, if the rasps were of a shallow hardening steel, the ricasso probably won't tell you how hard the edge of the blade is.

Doug

  • Like 1

Share this post


Link to post
Share on other sites
On 6/20/2018 at 9:08 AM, Doug Lester said:

Exceptional is about all I can say.  Anything else is just superlative.

If you go back to the same bar the edge is forged from at the ricasso you will get a better idea of the hardness of the edge which can also be thrown off by the fact that you are measuring the hardness of two steels.  Then again, if the rasps were of a shallow hardening steel, the ricasso probably won't tell you how hard the edge of the blade is.

Doug

Yeah, it is a bit tricky with twists like this... :)

Share this post


Link to post
Share on other sites

WoW!

I'm really impressed! It's a testimony of the finest craftsmanship and ... patience.

Beautiful!

  • Like 1

Share this post


Link to post
Share on other sites

Holy crap, that almost doesn't look real; it's too perfect! Very nice work. I hope to reach that level some day...

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...