Jump to content

Flatter Hammers


Recommended Posts

I'm thinking of making a flatter hammer and I'm looking for some basic indo. First, since you strike it with a hammer, does the head need to be softened to avoid chipping of either the flatter hammer head or the hammer you use to strike with? My thought is to use maybe a 4lb double head hammer and flatter one end. Do I need to do something to it other than flatten one end? Not sure exactly what I'm doing here and could use some advice.  Thanks

Link to post
Share on other sites

Personally I wouldn't bother.  I've had one for 20 years and have used it exactly once.  That said, yes, the striking end must be tempered back.  The other end must be dead flat with a slight radius on the edges so as to not leave bite marks.  

 

Flatters are one of those things that sound good in theory, but require a team of strikers or a power hammer to be of any use.  Doing it single-handed doesn't do a lot.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...