4 Japanese styled kitchen knives FS: Nakiri, Bunka, K-tip gyuto, & Petty

[Sal']

Hello all! To be honest I'm only listing this many for sale because I had gotten laid off work and had more time than usual to make a few more knives before the holidays were coming up. These are some of the first ones I finally put my makers mark on   If you like them please let me know, comments good and bad are always welcome!!!!! I'm still learning! All work was done by me! I'm naming my forge after my soon to be wife who believed in me and pushed me to do the thing I loved <3 I call her my Koala Bear, so my forge name is Koala Forge, and my touch mark is a Koala Bear which is hot stamped into all of my work

 

 

First up for sale is a Japanese Nakiri I forged, meant as a vegetable slicing workhorse for the kitchen
No saya is included but can be made for additional $75

1075 Carbon Steel
Weight: 299g
Edge Length: 147mm
Blade height at heel: 66mm
Blade thickness tapers from 3.9mm to 2.1mm.
Balance is right at my touch mark
 

Price is $350 Shipped CONUS
Would have been $375  but a shop visitor dropped the handle and there is 2 small aesthetic dents/dings in the wood

 

Nest up for sale is a Bunka i also just finished up. It's meant to be a very versatile everyday kitchen knife  
No saya is included but can be made for an additional $75

1075 Carbon Steel
Weight: 265g
Edge Length: 183mm
Blade height at heel: 56mm
Blade thickness tapers from 3.9mm to 3mm before the tip progresses down.
Balance is right at my touch mark
 

Price is $325 Shipped CONUS

 

A K-Tip Gyuto is ready to go  
No saya is included but can be made for an additional $75

1075 Carbon Steel,
Brass, Micarta spacer, and stabilized burl handle
Weight: 220g
Edge Length: 188mm
Blade height at heel: 55.5mm
Blade thickness tapers from 3.8mm to 2mm before the tip progresses down.
Balance is right at my touch mark

Price is $375 Shipped CONUS

 

Last is a hand forged petty ready to go
I was experimenting with thick forged tapers and weight/balance, and wasn't able to bring the blade finish as even as I would have liked while maintaining geometry and look that I wanted, so I discounted the price accordingly
No saya is included but can be made for an additional $75

1075 Carbon Steel,
African Blackwood and maple handle.
Weight: 161g
Edge Length: 128mm
Blade height at heel: 47mm
Blade thickness tapers from 6.5mm to 2.5mm before the tip progresses down.
Balance is right at the foot my touch mark

Price is $220 Shipped CONUS

 

No prices are firm, if you like something just let me know and make an offer, tis the season after all

 

Edited November 20 by Sal'
forgot to add some detail info