Jump to content
John Smith

I want to see your Hamon

Recommended Posts

mmab.jpg

 

marcin stal n8e niczego im nie mówi po amerykańsku nazywa się ona W1 albo W2

tak pozatym fajne noże

Share this post


Link to post
Share on other sites

This is (I think) my best Hamon to date I call it the Dragon`s Head! 1084 steel ,Rutlands furnace cement, feric cloride (1 part FC 5 parts H2O) 1000 grit finish Hope you like!

test1.JPG

test2.JPG

hamon1.JPG

hamon2.JPG

Share this post


Link to post
Share on other sites

Aah! The Roo,!!! :)

Share this post


Link to post
Share on other sites

Wow Ito! Now that is a hammon!!!

Share this post


Link to post
Share on other sites

Hey everyone, this is my first W1 hamon quenched in canola oil. I didn't get as much activity as I wanted so next time I will put the clay on a little thicker for the "fingers"

 

11DA53B1-50CC-46B0-B34E-67C9F37E652D.jpg

 

1A57187E-B549-4437-A458-EC64B2A40D4A.jpg

Share this post


Link to post
Share on other sites

That looks pretty good to me!

Share this post


Link to post
Share on other sites

Hey guys,

 

I photographed this knife over the weekend at the Badger Knife Show in Janesville, WI. It's made by Rick Barrett and the blade is 1095 tool steel, differentially hardened with hamon. Handle is Stingray skin wrapped in a traditional cord wrap. The Kydex sheath is lined with leather on the interior for blade finish protection. Rick calls it a "Tactical Tanto".

 

Barrett,Rick-Cord-Wrap-Polished-Carbon-F

Share this post


Link to post
Share on other sites

From an old file

 

th_740010221_20140406_153757_122_590lo.j th_739973227_20140406_154344_122_253lo.j th_740177803_20140406_145230_122_117lo.j th_740159594_20140406_145245_122_37lo.jp

 

 

I didn't manage to show the utsuri when I reached the final stage of polishing..

 

 

This is a Aldo's W2 forged blade,first time working with that steel..

 

th_219245331_20140526_220146_122_430lo.j th_219228550_20140526_220136_122_986lo.j

 

 

Need to improve a lot.Making a blade with hamon is .....a wonderful magical world for me!!!

Share this post


Link to post
Share on other sites

A Tanto in W2.

Ground to 600 and polished with EDM stones finished off with 2000 grit paper and a mix of pumice and silicon carbide powder.

bladeshow tanto.jpg

Share this post


Link to post
Share on other sites

I'm a new member (and new knife maker) and saw this thread about hamons and I must say, I love it! I thought I'd share a knife I made from 1080 with a hamon. Hope yall enjoy.

JqkIilJ.jpg

Share this post


Link to post
Share on other sites

New? NEW?!

Share this post


Link to post
Share on other sites

qf1VoEH.jpg

Hey all. I've been fascinated by hamons recently and wanted to ask opinions on this recent "experiment" test knife I just cooked up on the forge. It's an old Nicholson file and I just threw a quick clay coat on and swirled the clay around the tips to create some ashi. Then I did a interrupted water quench. What you see is a 320g VERY rough sanded part of it. All in all, I was extremely pleased with the results as I have never gotten one to look this good (well, at least I think so =P). Funny thing is I went about this without any thought or effort.

Share this post


Link to post
Share on other sites

Holy cow these are some of the nicest hamons I have seen, guys keep up the good work.

Share this post


Link to post
Share on other sites

I got obsessed with hamon lately guys...Inspired by all of you!!

 

Here is an old file

 

20140706_125841.jpg20140706_125832.jpg20140706_125826.jpg20140706_125758.jpg

 

 

a tanto from a forged file...It cracked at the edge during quenching,but i just have to find what hamon look like..

 

20140704_185930.jpg20140704_185925.jpg20140704_185917.jpg20140704_185910.jpg

 

a forged Yasuki White Steel

 

20140611_205416.jpg20140611_205347.jpg20140610_213423.jpg

 

 

a Save Edge Farrier's Rasp in a traditional Karaculak form

 

20140611_205154.jpg20140611_205210.jpg20140611_205152.jpg20140611_205110.jpg

 

 

all quenched in lukewarm water

 

I need to improve my skills in polishing

Share this post


Link to post
Share on other sites

Theodore,

Thank you for posting that interesting study, I am sure quite a bit of time went into the project. I am curious as to which one you like the most or which steel do you see having the greatest potential for an interesting hamon. You probably have an idea as to why that blade cracked and not the others. Have you compared an oil quench to a warm water quench for any given steel?

 

In about three weeks I will be doing a similar test, let me know if you have any suggestions..I have some drill rod from before WWII ( I think ) , which is very high in carbon and should give a hamon.

 

Jan

Share this post


Link to post
Share on other sites

Theodore,

Thank you for posting that interesting study, I am sure quite a bit of time went into the project. I am curious as to which one you like the most or which steel do you see having the greatest potential for an interesting hamon. You probably have an idea as to why that blade cracked and not the others. Have you compared an oil quench to a warm water quench for any given steel?

 

In about three weeks I will be doing a similar test, let me know if you have any suggestions..I have some drill rod from before WWII ( I think ) , which is very high in carbon and should give a hamon.

 

Jan

Jan,

Here in Greece is very tricky to find good steel for hamon..So recycle old files and properly forged them is one of our sources...

From the commercial steels i have seen great results from Yasuki White Paper....What an awesome steel for hamon (and for cutlery of course)!!!

Wish I had the chance to experiment with w2...Once we manage to get some from Aldo(great gentlement!!!),but the shipping cost was too high

 

 

This Tanto blade that broke had an interesting story...

Two months earlier I forged it and then quenched it to oil

I polished the blade but the hamon was at the primary edge due to "slow" cooling ratio of olive oil i used

 

20140613_203823.jpg20140613_203839.jpg

 

Then i put a razor sharp edge on

 

Later on and during the procedure of making the fittings i decided to requenched the blade for hamon...

I annealed it normalize it 4 times and quenched again in hot water for 15 seconds...When i pull the blade out all seemed

to went well till a heard those dreaded pings!!! Ping ping ping....like shotgun firing..

 

I think that the very thin edge is responsible for that...

 

So to answer the question...my choice is recycling files at first and occasionally commercial steel such White Paper or 1095..

Save Edge farrier rasp and some Nicolson are suitable for the job...Try first on some file then continue to commercial

 

I experiment only with lukewarm water at this time...Once i did a water to oil quench but i think i didnt had the harness i achieve

with only water method...

 

I have lot of videos and photos for study to remember all the details of my experiments..

 

Hope this help

Share this post


Link to post
Share on other sites

Man I like the tradition looks of some if these but I love Theodore's tanto with that wild hamon pattern it's just more well evil looking to me

Share this post


Link to post
Share on other sites

After the previous failure with the quench of the Tanto i forged a new tanto blade,again from an old file...

This time i left the edge at 2 mm thickness and i tried for a gunome pattern..

 

Just after the quench in lukewarm water

 

20140716_231110-1.jpg20140716_231127.jpg

 

After polished to 3000 grit and light etch with vinegar and lemon juice..

 

10596000_1450425848554672_1764652971_n.j10592149_1450425941887996_1277176841_n.j10595761_1450426101887980_1147423806_n.j10575920_1450425871888003_1732966016_n.j10592478_1450426035221320_1522309811_n.j

 

 

After this stage i will put a razor edge,repolish till 5000 grit and do another cycle of light vinegar-lemon juice and autosol..

 

Hamon is soooooo much fun!!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...